Hello, Fordel. I will try to help you on this problem, if that's OK. You have 4 dump files, which is what we go by, to debug a system . One said
Code:
atikmpag
start end module name
fffff880`02e8e000 fffff880`02f1b000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Wed Dec 19 13:32:55 2012 (50D21667)
CheckSum: 00095A98
ImageSize: 0008D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The graphics driver is way out of date and should be updated. Does your computer have a separate graphics card or does it run off of on board graphics? If you have either one, I can help you update it if you will let me know.
The 2 dumps that concern me most represent 50% of your dump files and are probably the most important. If that is what is wrong, it can make the rest of the dump files unreliable, so I would like to check that first. It is a very long test, but please follow the instructions as closely as you can. If you have any questions at all or do not understand something, please feel free to ask. I don't mind explaining anything at all. Next I am going to show you the error then give you the instructions for running the test. It is necessary for you to run 8 complete passes all at the same time or until you get an error. If you get even 1 error, stop the test, your ram has failed. It will most likely take quite a few hours. It takes one of my computers with 8 GB of ram 9.5-10 hours. It is best to run it overnight and let it run while you sleep.
Code:
Followup: memory_corruption
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff88001a3c73a, fffff88003b28aa0, 0}
Probably caused by : memory_corruption
Followup: memory_corruption
Please Run Memtest86+
Information
Please download from this site only
http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.