Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: DRIVER_POWER_STATE_FAILURE on shutdown

16 Dec 2014   #11
Slartybart

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem
 
 

Were these machines originally shipped with Win8? The HP site seems to imply that.

These are brand new machines ... please elaborate on the cloning reference.

Are all machines experiencing the issue HP ProDesk 600 TWR. Are they configured differently (hardware).

Golden bot identified drivers on two machines from the dumps - have you updated those drivers? Did that solve the issue on those machines?

Check for driver updates on any affected machine - Windows Updates offers hardware driver updates in Optional Updates. Install any that are offered.
What POS system are you using? I'm not certain that is causing the issues, but more information is better.

How many machines are affected? If it's only a few, it might be best to wait for a BSOD, identify the driver and update as needed. If it's 10 or more ... it might be better to start clean on all machines following the Clean re-install tutorial.

Back to Golden bot!

Bill
.


My System SpecsSystem Spec
.
16 Dec 2014   #12
HP600

Windows 7 Pro x64
 
 

Something has eaten my last reply, so I'll retype it:

* HP 600 TOWER, Win 7 from factory, supposedly all driver and bios updated, sometimes ten times in a row, sometimes can take months between errors, won't detect anything connected by USB and when we press the button to turn it off, will die after a while with an DRIVER_POWER_STATE_FAILURE . Hard to tell how much machines, i'd say in the tens.

* Now in the proccess to replicate it with a machine under my control without success, so I can talk to HP.

* First we formated them, then when the problem arised, we used the Win 7 that came with them as a basis for a Acronis True Image.

* POS keyboards are Cherry and no-brand. Also hand held Honeywell scanners.
My System SpecsSystem Spec
18 Dec 2014   #13
Slartybart

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem
 
 

Thanks for the update. I'm not sure what bullet #2 implies - are you working with HP on the issue?

If HP provides any useful support, please update your thread with what you find out even if it doesn't help solve the issue, but especially if HP does provide the solution.
My System SpecsSystem Spec
.

28 Sep 2015   #14
HP600

Windows 7 Pro x64
 
 

I didn't even remember I had an account at this forum... just for an update, I'll tell you we never knew what caused the problem.

What we did is to just change randomly the "faulty" hardware to customers. The most we had from HP was a "thank you, we can see is our fault but we have no idea of what the problem is" when we sent them hardware samples to the national HP headquarters (keyboards and bar code scaners) to test. Not very happy with them.

In retrospective I feel it's obvious the HP motherboards randomly don't send enough current to start some power hungry devices... another way to almost always correct the problem was to connect the usb hardware to an usb hub and the usb to the HP computers. And it didn't matter if it was a powered 20 bucks hub or an un powered free publicity hub.
My System SpecsSystem Spec
Reply

 DRIVER_POWER_STATE_FAILURE on shutdown




Thread Tools




Similar help and support threads
Thread Forum
BSOD on shutdown DRIVER_POWER_STATE_FAILURE
Hi, I have just reformatted my hard drives and reinstalled windows 7 when I came across a DRIVER_POWER_STATE_FAILURE BSOD on shutdown, there is no driver cause though when I view it in BSODViewer, I have uploaded the required file. Thank you
BSOD Help and Support
DRIVER_POWER_STATE_FAILURE 0x0000009f - after hibernation,shutdown
Hello guys, would you please analyze uploaded files from SF Diagnostic Tool ? After every shutdown or hibernation(monitor is going to sleep,but pc is runing ) desktop PC is regulary going to BSOD(it takes cca 20min from execute shutdown/hibernation to BSOD) . Next windows start I can see dmp...
BSOD Help and Support
DRIVER_POWER_STATE_FAILURE 0x0000009f on Shutdown
Hi, I've been getting this BSOD DRIVER_POWER_STATE_FAILURE whenever I'm in the process of shutting down my computer. Help to fix this would be most appreciated!
BSOD Help and Support
DRIVER_POWER_STATE_FAILURE BSOD on shutdown only
Hi all, I'm suffering from BSODs whenever I attempt to shutdown my computer. I never seem to have issues during normal operation. All I can tell is that ntoskrnl.exe seems to be related to the crashes. I haven't changed anything recently, to the best of my knowledge, and my computer had been...
BSOD Help and Support
BSOD - DRIVER_POWER_STATE_FAILURE on shutdown
Windows 7, brand new computer, has recently starting having trouble shutting down and it gets the BSoD at some point during the shutdown cycle. It also has trouble waking up from a hibernate. Dump file attached.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:06.
Twitter Facebook Google+