Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD ntoskrnl.exe+2e45f (DRIVER_POWER_STATE_FAILURE)

06 Jan 2015   #11
wallywonka

Windows 7 Professional - 64 bit
 
 

No. I turned it off right before I sent those files earlier today.


My System SpecsSystem Spec
.
06 Jan 2015   #12
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

I just wanted to be sure.
My System SpecsSystem Spec
16 Jan 2015   #13
wallywonka

Windows 7 Professional - 64 bit
 
 

I just wanted to check in and let you know I think I may have solved the problem...at least for now. After the last incident with the WSCommCntr4.exe crash, I searched Autodesk for problems/solutions with that executable and discovered a workaround. Since following the steps outlined in the link below, I have not had any problems with my cpu maxing out or crashes. I would like to give it another two or three weeks just to see before I mark this as solved.

Here is the link to the Autodesk Fix for the WSCommcntr4.exe:
WSCommcntr4.exe causes AutoCAD to become unresponsive | AutoCAD | Autodesk Knowledge Network

Thanks again for all your help!
My System SpecsSystem Spec
.

16 Jan 2015   #14
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Great, I'm glad you have it working. Well done. Once you have determined that your problem is resolved, please mark this thread as solved. Congratulations on a good job.
My System SpecsSystem Spec
13 Jul 2015   #15
wallywonka

Windows 7 Professional - 64 bit
 
 

Well, I thought the problem had been solved since it's been over 6 months with no issues. I started getting the exact same warning signs that the BSOD was on its way. Maybe it's something different this time. I ran the dm log collector and attaching the files. Had to be on a Monday.....smh..

Thanks in advance for any and all help.

VR,
Kyle
My System SpecsSystem Spec
13 Jul 2015   #16
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

hello, glad to hear from you again. Just not in the BSOD section. I checked your error reports and it seems you have a few ACAD errors, which I am sure you know is your AutoCAD, but you have had quite a few of the WSCommcntr4.exe errors.

This dump file says this

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8007d55440, Physical Device Object of the stack
Arg3: fffff80000b9a3d8, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa800acb5bd0, The blocked IRP
Code:
DRVPOWERSTATE_SUBCODE:  3
IRP_ADDRESS: fffffa800acb5bd0
DEVICE_OBJECT: fffffa8007a65030
DRIVER_OBJECT: fffffa8007db4cb0
IMAGE_NAME:  btfilter.sys
DEBUG_FLR_IMAGE_TIMESTAMP:  4f67e4fe
MODULE_NAME: btfilter
FAULTING_MODULE: fffff8800642c000 btfilter
That is the Atheros Bluetooth Driver

Also listed was

Code:
fffff800`00b9a868  fffff880`04eb61dfUnable to load image athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
 athrx+0x841df
Which should be expected and

Code:
fffff800`00b9a510  fffff880`04aa5c8c*** WARNING: Unable to verify timestamp for vpchbus.sys
*** ERROR: Module load completed but symbols could not be loaded for vpchbus.sys
 vpchbus+0xcc8c
That is your Virtual PC Host Bus Driver (Microsoft Virtual PC)
My System SpecsSystem Spec
Reply

 BSOD ntoskrnl.exe+2e45f (DRIVER_POWER_STATE_FAILURE)




Thread Tools




Similar help and support threads
Thread Forum
BSOD, DRIVER_POWER_STATE_FAILURE(9f) - ntoskrnl.exe
Hi All, Please help me, my PC is BSOD-ing while trying to I don't know, Sleep or Hibernate (I'm using hybrid). Sometimes it happens, and sometimes not for these past few days. I conducted some research and found out that it is because of a somewhat unstable driver. So.. a. I remember...
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0
Hi all, Last few days I'm experiencing BSOD. After couple of days of browsing, searching, updating drivers etc. I find myself powerless. Please, can anyone help? Thank you in advance. Jonci
BSOD Help and Support
BSOD ntoskrnl.exe and driver_power_state_failure
Hi, I have recently installed a SSD into my laptop and re-installed everything. I also switch the SATA mode to AHCI to improve the performance. But there is one problem that did not occur before is that after a long period of using the laptop, I cannot plugin any devices to the USB ports. Then I...
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe
BSOD happened twice recently when i was playing starcraft 2 , i've been searching everywhere to find the solution but there's no luck. can u guys please help me fix this??
BSOD Help and Support
BSOD - DRIVER_POWER_STATE_FAILURE, ntoskrnl.exe
I am getting random BSODs over the last two days. Most of the time I was away from the computer, but today was the first time I got a BSOD while using the computer. I built this rig around September 5th, 2011 and installed Windows 7 x64 Ultimate at that time. Specs i5 2500K 8 GB RAM GTX 570...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:30.
Twitter Facebook Google+