Frequent and varied BSOD windows 7 64 bit

Sorry that first one did not work out, hopefully this one worked correctly.
https://www.dropbox.com/s/pqya0lx882...23_01.zip?dl=0

Sorry I didn't understand you wanted it directly to the forum.

As I understand it the ram test takes several hours so I am going to ask this stuff before I start that.

How long should I be running the GPU test? The first says run a stress test until you crash or the test is finished. On the Furmark it says run until the GPU temps level out. How long should I be running this test? I ran it for 5 minutes just a little ago and my GPU temp started at around 35-40 and raised to 72 within 2 minutes then stayed there for the remainder of the 5 minutes so I assumed it leveled off. Is this correct of should I be running it until I crash or a large amount of time had passed.

Also for the CPU test my temps where very quickly raising above the safe operating temps that I found (Approximately 61-65) so I stopped the test after only about a minute to avoid problems. Should I let the test run despite the temperature or do something else.

My Hard Drive checks all passed all the tests.

Sorry about all the questions but I wan't to make sure I don't wreck my computer further, but I would like to properly do the needed tests.

I will run the Ram test tonight.

Alright the GPU test went fine, 16 minutes 72 degrees C. here is the GPU-Z Log.

I will start the alternate CPU test now.

Vary sorry this is so long but I see no other way to display the errors I got after running the Test. It immediately had several cores say stop worker and the forum post said to stop the test once errors occur and the stop worker thing indicates this.

Code:

[Main thread Dec 22 02:34] Mersenne number primality test program version 28.5
[Main thread Dec 22 02:34] Optimizing for CPU architecture: AMD Bulldozer, L2 cache size: 2 MB, L3 cache size: 8 MB
[Main thread Dec 22 02:35] Starting workers.
[Main thread Dec 22 02:36] Stopping all worker threads.
[Main thread Dec 22 02:36] Execution halted.


[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #2
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:36] Torture Test completed 0 tests in 0 minutes - 0 errors, 0 warnings.
[Dec 22 02:36] Worker stopped.


[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #3
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:36] Torture Test completed 0 tests in 0 minutes - 0 errors, 0 warnings.
[Dec 22 02:36] Worker stopped.


[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #4
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:36] Torture Test completed 0 tests in 0 minutes - 0 errors, 0 warnings.
[Dec 22 02:36] Worker stopped.


[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #5
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:35] ERROR: ILLEGAL SUMOUT
[Dec 22 02:35] Possible hardware failure, consult readme.txt file, restarting test.
[Dec 22 02:35] Maximum number of warnings exceeded.
[Dec 22 02:35] Torture Test completed 0 tests in 0 minutes - 0 errors, 100 warnings.
[Dec 22 02:35] Worker stopped.


[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #6
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:36] FATAL ERROR: Rounding was 0.4765625, expected less than 0.4
[Dec 22 02:36] Hardware failure detected, consult stress.txt file.
[Dec 22 02:36] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Dec 22 02:36] Worker stopped.


[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #7
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:35] ERROR: ILLEGAL SUMOUT
[Dec 22 02:35] Possible hardware failure, consult readme.txt f
[Dec 22 02:35] Maximum number of warnings exceeded.
[Dec 22 02:35] Torture Test completed 0 tests in 0 minutes - 0 errors, 100 warnings.
[Dec 22 02:35] Worker stopped.

[Dec 22 02:35] Worker starting
[Dec 22 02:35] Setting affinity to run worker on logical CPU #8
[Dec 22 02:35] Beginning a continuous self-test to check your computer.
[Dec 22 02:35] Please read stress.txt.  Choose Test/Stop to end this test.
[Dec 22 02:35] Test 1, 720000 Lucas-Lehmer iterations of M580673 using AMD K10 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Dec 22 02:35] FATAL ERROR: Rounding was 0.484375, expected less than 0.4
[Dec 22 02:35] Hardware failure detected, consult stress.txt file.
[Dec 22 02:35] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Dec 22 02:35] Worker stopped.