Asus Zenbook ux31e BSOD every time it goes to sleep


  1. Posts : 1
    win 7 home x64
       #1

    Asus Zenbook ux31e BSOD every time it goes to sleep


    Hey
    I've re-installed win7 on my zenbook ux31e. I've done it from usb stick rather then recovery partition (dont ask why no idea)

    Now im experiencing BSOD : KERNEL_DATA_INPAGE_ERROR
    every time i try to put it to sleep

    win7 x64

    I've ran the diagnostic on MEMORY.DMP which points to "ntkrnlmp.exe"
    But would love for someone else to take a look

    attaching SF_Diagnostic_Tool stuff
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Welcome to the forum.

    Run Disk Check on your Hard Drive for file system errors and bad sectors on it.

     Hard Drive Diagnostics


    • Double click and open my computer.
    • Right click on desired drive and hit properties.
    • Click on tools tab and Check now.


    Read complete instructions on the tutorial: Disk Check

    Other Tests:
     




    Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

    The goal is to test all the RAM sticks and all the motherboard slots.

    Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

    If you get errors, stop the test and continue with the next step.

    1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
    *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
    If this stick passes the test then go to step #3.

    2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
    *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
    *If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
    3. Test the next stick of RAM (stick #2) in the next motherboard slot.
    *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
    *If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
    4. If you find a stick that passes the test, test it in all the other motherboard slots.

    If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

    In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
       Information
    Errors are sometimes found after 8 passes.

       Tip
    Memtest should be done overnight.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:40.
Find Us