Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD on computer after motherboard upgrade

08 Jan 2015   #101

Windows 10 Pro/ Windows 10 Pro Insider

Try putting the ram in the blue slots and enable driver verifier again.

warning   Warning
Be sure to create a System Restore point before proceeding further System Restore Point - Create

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.

What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.
warning   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.

My System SpecsSystem Spec
08 Jan 2015   #102

windows 7 pro 64bit sp1

Ok i will do that then
My System SpecsSystem Spec
08 Jan 2015   #103

Windows 10 Pro/ Windows 10 Pro Insider

Same thing you did before.
My System SpecsSystem Spec

09 Jan 2015   #104

windows 7 pro 64bit sp1

upon bootup after switching ram slots got this bsod
My System SpecsSystem Spec
09 Jan 2015   #105

Windows 10 Pro/ Windows 10 Pro Insider

It still says
Use !analyze -v to get detailed debugging information.
BugCheck 7F, {8, 80050031, 406f8, fffff800034b0918}
Probably caused by : memory_corruption
Followup: memory_corruption
But looking farther says a double trap

This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
I'll get some help with this. Just hold on.
My System SpecsSystem Spec
09 Jan 2015   #106

Windows 10 Pro/ Windows 10 Pro Insider

It's USBSERVIEC E which is from Crystal Rich Ltd USB Safely Remove assistant service

My System SpecsSystem Spec
09 Jan 2015   #107

windows 7 pro 64bit sp1

Ok i have removed any sort of usb safely eject programs so it is back to default windows removal i also happen to notice when i use my usb wifi adapter sometimes my browser will crash i have firefox and chrome if one crashes it will not open back up untill i reboot computer normally i just use the other browser in mean time that is which ever one did not crash at that time for some reason i have a sneaky suspicion that usb might have something to do with alot of my crashes but not sure if it would be bad drivers or something else
My System SpecsSystem Spec
09 Jan 2015   #108

windows 7 pro 64bit sp1

Anyway to test/stress usb ports and or drivers to see if it causes any subsiquent crashes
My System SpecsSystem Spec
09 Jan 2015   #109

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

EDIT: A double fault with driver verifier enabled.
Verify Flags Level 0x00000000

    [X] (0x00000000) Automatic Checks
Which points to memory corruption.
MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption
Gives a high notion that the issue is a hardware related.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us.

Stress test the CPU.
Hardware - Stress Test With Prime95
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Disable any overclocks.

Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Let us know the results.
My System SpecsSystem Spec
09 Jan 2015   #110

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2

Do everything the others have suggested first - it is good advice. :)

After that, you might try this: See if you can beg, borrow, buy, or steal a pair of RAM modules and re-test everything with them. You may have all good hardware, just RAM and a motherboard that don't get along. You might also try UNDERclocking your RAM and see what happens. If you're not sure how to do that just ask.
My System SpecsSystem Spec

 BSOD on computer after motherboard upgrade

Thread Tools

Similar help and support threads
Thread Forum
Win 7 BSOD after motherboard upgrade
Hi all, I recently upgraded my motherboard from a Gigabyte P35-S3G to a Gigabyte G41M-ES2L (rev 1.0) with F4 bios. I have 2 hard drives installed on the system, a 320GB with Linux Mint 17.2 64bit and a 1TB with windows 7 professional 32bit and most of my important data. The error I get is the...
BSOD Help and Support
BSOD After Fresh Windows 7 Install, Motherboard Upgrade
Hi. I just recently bought an AMD FX-9590 CPU and come to find out my old motherboard didn't support it. I've upgraded to a Gigabyte 990FXA-UD5 from an ASUS M4A78T-E. After a fresh install of Windows 7, I continually get an F4 and 7A error code BSOD. Main Drive is 107GB OCZ-VERTEX2 3.5 ATA...
BSOD Help and Support
BSOD while randomly using computer after replacing motherboard + CPU
Greetings, Thanks for having me. I want to ask for help on a random BSOD experience I am having with my computer. I am quite frustrated after replacing my motherboard and CPU since I'm experiencing random BSOD's now 3-5 times per week. My old motherboard (a Z87) was RMA'd so I figured I...
BSOD Help and Support
BSOD when pc booting recent upgrade of motherboard and cpu
Evening all, Desperate for some help just upgraded my pc componants and now it will not start at all. As far as i can see all the bios settings are correct. On first start up a message come up first saying no disks found, then when i click onto the bios menu i have AHCI mode enabled and it...
Hardware & Devices
Motherboard and CPU Upgrade Options
Hey everyone, as you may already know that i had a previous thread ( asking which i should upgrade. I want to be upgrading the motherboard and the CPU, i need options on which i should upgrade...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:23.
Twitter Facebook Google+