The CPUz screenshots are not a test, just a look at how things are set up. If you were having the same thing happen before the new motherboard, CPU and ram, logic would say that it was probably something you brought over from the old machine.
Ok will try to get the screen shots the computer did not have any problems before i replaced the parts i only replaced them because motherboard would no longer boot beeping like it had no ram
ok here are the snapshots of cpuz i also included pic of memtest in action and also a pic of what hdd says in bios i am unsure where to find what sata controller is set to in bios i dont know where to find that setting if you can tell me i will look also when you say run seatools long test are you talking about long generic test
Could you put the pictures in a new post. I can't open them the way they are without downloading them to my computer. It will also help in dealing with is problem if they are there and visible on the new post.. This will tell you how to upload the photos, it's quite easy.
Screenshots and Files - Upload and Post in Seven Forums
Yes I was talking about the long generic test in Seatools.
I am not familiar with your BIOS, but look in the advanced section and see if you have sata configuration or anything similar. Your options will be IDE, AHCI or Raid. Don't change anything right now, just let me know what it is set to.
sorry bout that here are new uploads also cpu temp seems to stay between 17 to 27c so far and i am running long test now
sorry did not realize there was more on spd screen of cpu z here they are
I only want to know which one it is already set to. Don't change it, just let me know what it is and remember how to get there. If you change it, you won't be able to boot, but you need to know how to get there and how to change it in case you need to. Don't be afraid of the bios. learn it. It can help you out on many occasions.
Port 1 thru 4 are set to ide and port 5 thru 6 are set to ide
Quote