BSOD after booting

katonoszta · 14 Jan 2015

Hi guys

i have BSOD problem with my PC, so basically i turned on the pc and goes normal, but after around 40 minutes my PC freezing, then i decided to restart, after succesful booting BSOD appear. it was so fast that i can't take a picture of it.

i had used the dm collector but it seems cannot collect the dump files, what should i do guys? thank you So much

Golden · 14 Jan 2015

Check in C:\Windows\Minidump - are there any .dmp files there?

katonoszta · 14 Jan 2015

I had checked many times, and there are no .dmp files. Thanks for replying

Golden · 14 Jan 2015

Follow this first to create minidumps:
Dump Files - Configure Windows to Create on BSOD

Now follow this:

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

katonoszta · 14 Jan 2015

Thank you, i'll try it

katonoszta · 15 Jan 2015

So after waiting for few hours finally the BSOD appears, but when i try to restart my PC the monitor just goes black and nothing happened even after few minutes, i try to unpluged the cables many times and turned on the pc but still nothing happened. Is this problem related to my PC hardware(s)?.I currently using my Notebook instead of my PC. This picture of BSOD is the only information that i can currently provide, and i hope the minidump file(s) are still there.

Thank You

katonoszta · 15 Jan 2015

Yeah finally i get the dump file, i also add preview from BSOD viewer

Golden · 16 Jan 2015

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff8800a16a9d8, fffff8800a16a230, fffff88001291dde}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Reference:
RAM - Test with Memtest86+

katonoszta · 16 Jan 2015

Thank You so much for replying

I'll contact you again if i find something

Golden · 16 Jan 2015