BSOD - Some minutes after boot. Error ntkrnlpa.exe (nt+0xDEE0C) 0xF4


  1. fsh1
    Posts : 2
    Windows 7 Ultimate x64
       New #1

    BSOD - Some minutes after boot. Error ntkrnlpa.exe (nt+0xDEE0C) 0xF4


    Hello, I have an ASUS G74sx DH-71 laptop. After a clean install I updated with windows update and now I'm receiving BSODs.

    Prerequisites:
    1) HDD running in AHCI mode.
    2) HDD S.M.A.R.T. 100% Health - Tested no bads, realocs or other issues.
    3) Ram Tested with memtest86+ 6 Cycles - No Issues.
    4) Operating system - Windows 7 Ultimate x64.

    I have uploaded the dumps using SF Diagnostic Tool please take a look.

    Please if more info is needed ask I'll answer promptly. Thank you for your help.
      My Computer
    Quote Quote

  3. Laith
    Posts : 2,781
    Windows 10 Pro x64
       New #2

    Hello and welcome to Sevenforums!
    This might be a virus follow this guide:
    Malwarebytes Anti-Malware Free
    This could also be a harddrive problem follow this guide:
    SeaTools for DOS and Windows - How to Use
    This could also be a RAM problem follow this guide:
    RAM - Test with Memtest86+
      My Computer
    Quote Quote

  4. fsh1
    Posts : 2
    Windows 7 Ultimate x64
    Thread Starter
       New #3

    Or maybe its my neighbours dog barking outside the root cause. I've enumerated all your suggestions as done from the beginning, please pay attention.
      My Computer
    Quote Quote

 

  Related Discussions
Have a home build PC that I put a fresh install of Win7 on and it ran for a few days just fine while I was installing all my preferred programs and Windows updates. Then all of a sudden I started getting BSOD with code 124. Memtest ran 16 passes with no faults (23 hour run) and Windows repair tool...
Hi, I have been experiencing BSOD the last 3 days for no apparent reason (no hardware or major software changes). The PC will boot into the desktop and seem to be working normally then within a few minutes the system will become unresponsive and give a BSOD 0xf4 CRITICAL_OBJECT_TERMINATION,...
Hello, and thanks in advance. I am working remotely with a computer owned by a family member of mine. The computer is running: - Windows 7 Professional 64-bit - System was built by me in the past - This version of windows comes free via the MSDN where I am a student (so full retail I think)...
Hello, I'm having problems with my laptop, with some random BSOD. The system spec are: HP Probook 4530s Win 7 Pro SP1 OEM 32bit (I have no Windows 7 disk or driver...) Intel Core i3-2330M CPU @2.20GHz 750 GB HDD 2 GB DDR3 ram
Hi all. I built my computer about a month ago. Worked fine for a while, and then it started to hang then crash about 4 or 5 minutes after every boot. This happens even in safe mode. I did a clean installation of Windows 7. Everything was fine for about two weeks... and now the hanging+crashing is...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 14:22.
Find Us