pizzaboy66, out of your last 6 dump files 2 blamed your AMD Drivers, one blamed your Panda anti virus, which I believe you said you uninstalled and 2 blamed memory corruption.
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {80000003, fffff960000cd6f7, fffff8800b422ff0, 0}
Probably caused by : memory_corruption
Followup: memory_corruption
I am inclined to believe if you are having issues with this game only, it is more likely it is a poorly encoded game. There are numerous reports of people who are having similar problems. A bad driver can cause memory corruption as well as ram.
I am going to ask you to do several things for me, and please do them in this order.
Please reinstall your driver, but do it the way I am going to give you instructions.
I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from https://www.sevenforums.com/graphic-c...ndows-7-a.html . Once you have them downloaded, uninstall you current driver from control panel. next clean up any left over drivers from following this tutorial Drivers - Clean Left over Files after Uninstalling and select only ATI Display Drivers. After you have done that and rebooted, install the new driver, only select custom install and install only what you have to. Very few people need most of what they include. You do not need the audio/HDMI drivers as you already have that in your Motherboard drivers. Unless there is some reason you need them, the only thing you really need is the Display Driver.
Next, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
Please Run Memtest86+
Information
Please download from this site only
http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
Then please run Furmark, but have a good GPU monitoring program. If you need suggestions, I will give you one. Your temps will rise rapidly and very high. If they become too high, stop the test. While running it, watch for any artifacts. Run it long enough to where your temps rise and then level out and stabilize. But again, watch the temps very closely. Stop the test if they become too high, but please don't use speedfan. Video Card - Stress Test with Furmark
If you have any questions or do not understand any of the instructions, please ask. I don't mind explaining at all. Keep me posted as you progress through the tests.