Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Error 0x124 with reports attached

22 Jan 2015   #1

Windows 7 Ultimate x64
Error 0x124 with reports attached

I built my PC a few months ago (November 2014) and its been having error 0x124 since its first boot up and I did some research finding out that its related to hardware problems or in "rare" cases just a driver problem. To also mention that it completely stops and just resets with no Blue Screen error filled report. It just freezes, restarts, and notifies me of the error in basic detail once I boot up again. I will attach the 20+ crash reports that I have. It happens any time at all, if I am on the internet, playing a game (most common to happen) or just plain idle on desktop but it happens the least. Please let me know if you find anything in my crash reports that's worth noting.

My System SpecsSystem Spec
24 Jan 2015   #2

Windows 7 Ultimate x64

Can someone at least tell me how to read the error reports so I can spot the problem?
My System SpecsSystem Spec
24 Jan 2015   #3
Microsoft MVP

Windows 7 Ult. x64

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800985e4b8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
0x124's are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:

RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+

CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest

Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark

Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use
My System SpecsSystem Spec

28 Jan 2015   #4

Windows 7 Ultimate x64

Alright thank you for the reply. I am gonna run these tests. My CPU is stable so far, I am about to run the GPU test then
My System SpecsSystem Spec
28 Jan 2015   #5

Windows 7 Ultimate x64

GPU is stable. I ran it for like 30 minutes and it didn't crash at all.
My System SpecsSystem Spec

 Error 0x124 with reports attached

Thread Tools

Similar help and support threads
Thread Forum
7GB of Error Reports???
Well I was about to run disk cleanup because of my SSD filling up when I noticed this, 7GB of queued error reports??? That can't be right?
Performance & Maintenance
BSOD errors in Windows 7 64bit (reports attached) help please
Hello I've just installed the full retail version of W7 64bit and am having regular BSOD crashes and 'Recovered from a serious error' messages. Hardware is 1 year old (Intel DH67GD) i2500K, 12 GB RAM). Any suggestions welcomed, thanks, joe
BSOD Help and Support
BSOD is killing the laptop, error log and performance reports attached
Please help - how to get rid of the Blue Screen Core Dump Problem . System Spec Windows 7 64 bit Original installed OS, OEM. Lenovo Laptop W700, around 3 years old. Thanks
BSOD Help and Support
DIR 615 reports link at 300Mbps, windows reports 150Mbps
Hello there, Recently setup my home wifi network, i had been noticing that my link speed to any device through my Dlink DIR 615 router, was always 65Mbps (as reported by the device), i searched around that i should set the channel width to 'auto 20/40mhz' to gain speed; however now that i did...
Network & Sharing
Random BSOD. Reports attached
Windows 7 professional x64 OEM Version Hardware 6 months old Install 2 weeks old Getting a lot of BSOD with various error messages. Only overclocking I've done is setting the RAM to the max speed listed on the packaging (1066Mhz) but I left the NB voltage at stock.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:37.
Twitter Facebook Google+