BSOD: System Service Exception, Random Occurrences

Woody, I'm not completely awake yet. You'll have to give me a while on this one.

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See Kernel patch protection for x64-based operating systems
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d896051624, Reserved
Arg2: 0000000000000000, Reserved
Arg3: 591308667d93d18b, Failure type dependent information
Arg4: 0000000000000101, Type of corrupted region, can be
 0 : A generic data region
 1 : Modification of a function or .pdata
 2 : A processor IDT
 3 : A processor GDT
 4 : Type 1 process list corruption
 5 : Type 2 process list corruption
 6 : Debug routine modification
 7 : Critical MSR modification

Woody, please run a complete scan with your anti virus. After that please run a scan with these online anti virus scanners.

Scan with Kaspersky TDSSKiller:
Anti-rootkit utility TDSSKiller
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET


Also please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

OK, Let's try this. But, create a Restore Point before you do it. An absolute must! The link to how is below. If you don't create a restore point, you may be reinstalling. Sort driver by provider. enable all drivers not provided by Microsoft.

   Warning

Be sure to create a System Restore point before proceeding further System Restore Point - Create

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.

What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.

   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Good. That's the purpose of it, to make the computer BSOD and hopefully catch the offending driver. Use the PC any way you want and keep verifier on for 24 hours of actual use.

Try letting it run just a little longer. It's a good chance at catching the bad guy. So, let it run a little longer, if you don't mind. then you can disable it. Driver Verifier - Enable and Disable

Run Seatools for DOS SeaTools for DOS and Windows - How to Use The short and the long test.