Random BSOD after installation of SSD

Can you help me please?

It is almost two years I bought SSD disk. I pluged it into SATA3 6Gb (next to HDD) and configured it as AHCI, as well as I changed HDD from IDE to AHCI and made SSD bootable OS drive. From that time random blue screen happens (1-2x in a week). But before BSOD occurs, the screen becomes smudgy for less than a second.

After I installed verifier, there is no BSOD, but again randomly smudgy screen happens and computer is unusable until handy shutdown.

I attach smudgy foto and my configuration.

I did everything, like
memtest
sfc /scannow
update all drivers
update ssd firmware (it is interesting, that update has been succesful only if ssd was in ide mode)
reinstall whole OS.
update motherboard BIOS
and so on.

Thank you for any advise.

Hello and welcome James mate there is some references to updates in the dump files now whatever that is the cause is I am not positive about.

What has got me wondering is why should the ACHI mode have any effect on downloading and installing updates. Now it may be an idea to system restore back as far as you can in safe mode and set the BIOS to the ACHI mode for the SSD - unplug the other drive and try again to update.

Now you seem unsure of what PSU you have but it doesn't really matter whatever of those wattages are good but I would like to see a screenshot of the readout for it if you can get the machine to go.
See my little ditty and pic

Using HW Info
You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic.
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

Just as an afterthought you could run this too with the spinner unplugged
https://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2 > again in safe mode.

Ok mate nothing wrong with the voltages in fact spot on - always like them tad over than under and in any case they need to be within +/- 0.5v max of the stated voltages.

Now that screen it could be anything now I think from a graphics driver to a GPU failure monitor failure but before we go there I do see some references to updates and to iexplore.exe in the dump files and which some are questioning as possible malware even though it is a Windows process but as another person just now his linked Window stuff can be identical to what is normal and what is not - ie that .exe could be named the same as the genuine Windows feature yet be malware..

So mate could you run these first and see if anything comes up?

http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(with ADW if you are running Kaspersky it will throw it up as malware just override Kaspersky)

These are just some very basic scans but are the usual ones we recommend first up

Also I see you have doe a SFC but not the chkdsk which I always get folks to do in conjunction to the SFC
https://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

Yes, you were right, it found some minor errors on drive C. At the time I was looking for the log from chkdsk in event. viewer, another BSOD happend,so it can not be the reason.

As for malware, it founded just tracking cookie. I delete cookies after every session in IE automatically.

I attach log from chkdsk.

Well I didn't notice the cursor as it was black and I am not so sure that it would be smudgy with the screen to be honest.

I still think it would be worth reseating the GPU and even gently cleaning the slots and contacts on it
SLOT CLEANING
Now as for the slots to clean them use a strip of old credit card about 1/2 inch wide nip the corners off one end - preferably round them offhold a piece of thin lint free cloth over the end dab on some form of alcohol - isopropyl alcohol (what we swab the skin with before an injection) is good and GENTLY swipe along the slots.
This can also be done for the GPU slot/s and also the contacts of the sticks or cards - not the stick but some lint free cloth of course. See my pic for the sick but please be very gentle doing it if you are in any doubt - please ask before doing it but I use this all the time and have yet to damage anything.

Then if you haven't tried updating the driver for that card if that doesn't work then just recently we found a fix for someone with a sort of similar problem and that was to uninstall the Catalyst Control Centre and update the Radeon driver.

There are toher stuff we might have to test out like the drive for example.