New
#1
Unable to Auto Repair on startup - now in Advance Boot Options
I did let it run and left for awhile... I was able to scroll through the report, and copied the errors. All other test report no errors: (I left one auto repair in text. See if you can spot it... :))
Number of repair attempts: 2
All other tests perfumed successfully…
System Disk = \Device\Harddisk0
Windows directory - E:\windows
Autocheck Run = 0
Number of root causes = 1
Root cause found:
------------------------------------
Unspecified changes to system configuration may have caused the problem
Repair action: System Restore
Result: Completed successfully. Error code 00
Time taken = 402171 ms
Repair action: System integrity check and repair
Result: Failed. Error code = 0x490
Time taken = 894167 ms
------------------------------------
------------------------------------
System Disk = \Device\dHarddisk0
Windows directory - E:\windows
Autocheck Run = 0
Number of root causes = 1
Root cause found:
------------------------------------
Unspecified changes to system configuration may have caused the problem
Repair action: System Restore
Result: Completed successfully. Error code 00
Time taken = 402171 ms
------------------------------------
——————————————————
I have no Repair Disk
No Startup Repair
No system restore points??
No System Image to recover?
Doesn’t appear to be a Memory Problem
Command prompts. Any suggestions?
I can get into the Aptio Setup Utility
It is now in advanced boot options hoping? for some remedy to it’s current malaise