Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random BSOD Page_Fault_In_Nonpaged_Area BugCheck 50

22 Feb 2015   #1

Windows 7 Ultimate x64
Random BSOD Page_Fault_In_Nonpaged_Area BugCheck 50

This has become really annoying. It was very infrequent at first, but I had to reinstall Windows 7 (64-bit) when BSOD with this error started appearing right after the system had booted. For about a day or a two there were no BSODs, but it has started happening again.

Please help.
Here's the analysis of the dump file on WinDbg:
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffff8a00a766000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002f98079, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f0a0e0
GetUlongFromAddress: unable to read from fffff80002f0a198
 fffff8a00a766000 Paged pool

fffff800`02f98079 410fb701        movzx   eax,word ptr [r9]





PROCESS_NAME:  svchost.exe


ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre

TRAP_FRAME:  fffff880085fa000 -- (.trap 0xfffff880085fa000)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002f98079 rsp=fffff880085fa190 rbp=000000000008fc28
 r8=000000007ffff960  r9=fffff8a00a766000 r10=000000000006ed2c
r11=0000000000000008 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
fffff800`02f98079 410fb701        movzx   eax,word ptr [r9] ds:fffff8a0`0a766000=????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002d531e4 to fffff80002cd3f00

fffff880`085f9e98 fffff800`02d531e4 : 00000000`00000050 fffff8a0`0a766000 00000000`00000000 fffff880`085fa000 : nt!KeBugCheckEx
fffff880`085f9ea0 fffff800`02cd1fee : 00000000`00000000 00000000`00000003 fffff800`02e89a00 fffff800`02cfae00 : nt! ?? ::FNODOBFM::`string'+0x42907
fffff880`085fa000 fffff800`02f98079 : 00000000`01000000 fffff800`02f98461 fffffa80`04a00930 fffff800`02f985a4 : nt!KiPageFault+0x16e
fffff880`085fa190 fffff800`02f96932 : 00000000`000d56a0 00000000`01000000 00000000`00000001 00000000`00000004 : nt!MiCompressRelocations+0x70
fffff880`085fa1e0 fffff800`02fcc5d1 : fffff8a0`0a4dd000 fffff880`085fa3f0 00000000`00000095 00000000`00000000 : nt!MiRelocateImage+0x4a2
fffff880`085fa350 fffff800`02fc1893 : fffff880`085fa5b0 00000000`00000000 fffff880`085fa658 00000000`00000001 : nt!MmCreateSection+0x825
fffff880`085fa560 fffff800`03130573 : 00000000`00000000 fffff8a0`0a4035b0 00000000`00000000 00000000`00000001 : nt!NtCreateSection+0x162
fffff880`085fa5e0 fffff800`03130b01 : 00000000`00000000 fffff8a0`0a4035b0 fffffa80`085662f0 fffff880`00000060 : nt!PfpFileBuildReadSupport+0x163
fffff880`085fa6d0 fffff800`03138c1e : fffff8a0`00000000 fffff8a0`00000006 fffff8a0`00000008 00000000`00000001 : nt!PfpPrefetchFilesTrickle+0x121
fffff880`085fa7d0 fffff800`031397b7 : 00000000`00000000 fffff880`085fac60 fffff880`085fa9c8 fffff8a0`026e2060 : nt!PfpPrefetchRequestPerform+0x30e
fffff880`085fa920 fffff800`03145d8e : fffff880`085fa9c8 00000000`00000001 fffffa80`092f68c0 00000000`00000000 : nt!PfpPrefetchRequest+0x176
fffff880`085fa990 fffff800`0314a4be : 00000000`00000000 00000000`01ecf7d0 00000000`0000004f fffffa80`084cab01 : nt!PfSetSuperfetchInformation+0x1ad
fffff880`085faa70 fffff800`02cd3153 : fffffa80`093158b0 00000000`0000004f 00000000`00000001 00000000`00000001 : nt!NtSetSystemInformation+0xb91
fffff880`085fabe0 00000000`773515aa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`01ecf738 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x773515aa


fffff800`02f98079 410fb701        movzx   eax,word ptr [r9]


SYMBOL_NAME:  nt!MiCompressRelocations+70

FOLLOWUP_NAME:  MachineOwner



IMAGE_VERSION:  6.1.7600.16385

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x50_nt!MiCompressRelocations+70

BUCKET_ID:  X64_0x50_nt!MiCompressRelocations+70


FAILURE_ID_HASH_STRING:  km:x64_0x50_nt!micompressrelocations+70

FAILURE_ID_HASH:  {90c79c81-a817-2366-53af-400839fd88f1}

Followup: MachineOwner

My System SpecsSystem Spec
22 Feb 2015   #2

Windows 7 Home Premium 64-Bit SP1

No tutorial came through.
My System SpecsSystem Spec
22 Feb 2015   #3

Windows 7 Ultimate x64

Very well. And?
My System SpecsSystem Spec

22 Feb 2015   #4

Windows 7 Home Premium 64-Bit SP1


I hope this one comes through.

It looks like a problem on my side, with that said who ever looks at this will you please give (eminemer) the Blue screen of death (BSOD) posting instructions as mine is not working for some reason or another...

Go ahead and click the posting instruction it will get you to the BSOD posting instructions that you need.
My System SpecsSystem Spec

 Random BSOD Page_Fault_In_Nonpaged_Area BugCheck 50

Thread Tools

Similar help and support threads
Thread Forum
BSOD at random times, Bug check PAGE_FAULT_IN_NONPAGED_AREA
Hey, basically I have been having BSOD's for a couple of days now. It felt like performance on my computer has been slowly deteriorating anyway and now this. I have had a suspicion that it has something to do with RAM. It happened again 10 minutes ago, my game was taking a really long time to load...
BSOD Help and Support
Random BSOD - page_fault_in_nonpaged_area ntoskrnl.exe
I used WhoCrashed to look at the minidump files. I have 2 reasons that show in all the errors "page_fault_in_nonpaged_area" and "Memory Management", both point to ntoskrnl.exe The crashes happen 1 - 2 times a day and seem random. The machine hardware and software have remained mainly...
BSOD Help and Support
Random BSOD always on PAGE_FAULT_IN_NONPAGED_AREA; ntoskrnl.exe
Hello, I keep having BSODs and they seem to be random as far as I can tell. The error is consistently the same but I dont know how to trouble shoot it. Any help would be appreciated. This is my bluescreenview program dump. I dont know whats causing it. At first I thought bad stick of ram, and I ran...
BSOD Help and Support
Random BSOD PAGE_FAULT_IN_NONPAGED_AREA I have run a windows memory diagnostic and no errors came up I ran SFC/scannow and no errors Tested main drive in samsung magician and two other hdd with chkdsk and no errors When the crash occurred I had no recently installed any new hardware and...
BSOD Help and Support
I have been getting random BSODs and BSOD almost everytime I shut down my PC. I have never had a problem like this and have no idea what to do to fix this. I have attached the Minidumps and Performance Report. Any and all help is much appreciated. Thanks in advance. Steve Windows 7 Home...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:26.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App