BSOD when playing all videos, error 0x00000116, atikmpag.sys

Go back to the last one then, I guess. You have to have graphics drivers.

That's great news. I'm glad you have it stable now. You are welcome for whatever I had to do with it, you did the work.

Hi essenbe,

This time round, laptop hangs after sometime and i couldn't catch a certain patten when it happens. My only way out was to force shutdown and boot again. I also get no display to even use Ctrl+ Alt+ Del but i can move the mouse and i see the cursor moving for awhile. After a few times it happens, then the same error 0x00000116, atikmpag.sys came back after a "Display driver stopped responding and has recovered".

I then proceeded with cmd scan and its done and windows found no integrity violations.

C:/Windows named Minidump copied and attached.

Hanging and BSOD doesn't happen as quick as before, but i would say it is less severe.
Seems like the peace only lasted about a month. I wonder why...

*Current status[09Jul2015]: No BSOD till now since it last happened.

aHere is what the dump file you uploaded said

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 4E, {2, 1d9e6d, 25fdff, 1}
Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+8d )
Followup: MachineOwner

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask