BSOD: Only got it recently which is last Night (12.04.2015)

Hello, LeiweRegan. I will try to help you if I can. I looked at the 11 Dump files from 4-13. This is what I found not including most of the duplicates. There were others dating back to 4/2/15.

Code:

BugCheck 19, {20, fffffa800ab5bb70, fffffa800ab5bc00, 4090006}
GetPointerFromAddress: unable to read from fffff80002efc100
GetUlongFromAddress: unable to read from fffff80002efc1c0
GetUlongFromAddress: unable to read from fffff80002e6aa38
Probably caused by : memory_corruption ( nt!MiAddSecureEntry+f4 )
Followup: MachineOwner

Code:

BugCheck A, {7274303a, 2, 0, fffff800031fd76c}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
Followup: MachineOwner

Code:

BugCheck 3B, {c0000005, fffff88004628546, fffff8800aba8840, 0}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_DEVICE::RemoveCommitment+1e )
Followup: MachineOwner

Code:

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000058, memory referenced
Arg2: 0000000000000006, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800fdbe4d2, address which referenced memory
Debugging Details:
------------------
Unknown module 'Unknown_Module_fffffa80_069968c0' found on stack, using vad to reload module.
!vad_reload -1 0xfffffa80069968c0
Unable to get nt!_EPROCESS.VadRoot at fffffa8006a04040
Unknown module 'Unknown_Module_fffffa80_069968c0' found on stack, using vad to reload module.
!vad_reload -1 0xfffffa80069968c0
Unable to get nt!_EPROCESS.VadRoot at fffffa8006a04040
Unknown module 'Unknown_Module_fffffa80_069968c0' found on stack, using vad to reload module.
!vad_reload -1 0xfffffa80069968c0
Unable to get nt!_EPROCESS.VadRoot at fffffa8006a04040
***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Code:

BugCheck C4, {91, 0, fffffa800c3bd060, 0}
Probably caused by : memory_corruption
Followup: memory_corruption

Code:

BugCheck 124, {0, fffffa80079958f8, 0, 0}
Probably caused by : AuthenticAMD
Followup: MachineOwner

Code:

BugCheck D1, {84, 2, 0, fffff8800fd564e0}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiIsHardwareCompletedDependingCommandForFlip+18 )
Followup: MachineOwner

If you will notice all but 1 bugcheck are different codes, which is not proof, but an indication of Memory Corruption. 2 of the Errors specifically stated memory Corruption and one, the next to last one, was an 0X124 which is a generic code that indicates a hardware error.

To someone who analyses BSODs, memory corruption is the worst cause to have. That is because bad memory can make every other code meaningless. When memory throws an error, whichever driver is most in use will get the blame. So, I would like you to test the memory first. Please use the following instructions. The test has to be run for 8 consecutive passes all run at the same time. It will take quite a few hours to do that, so we always suggest running it at night while you sleep. If you get an error, you can stop the test.

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.

I also need you to fill in your system specs as detailed and complete as possible. Please include your PSU and CPU cooler and all Manufacturers and models. We often have to look up specs on components and cannot do that without that information. This may make it easier for you.

Please fill out your System Specs

   Information

Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

If you have any questions or do not understand something, please feel free to ask.

LeiweRegan, I'm not sure what you are asking. I gave instructions for you to do a few things that will help me figure it out for you. So far, I have not heard or seen the results of those requests.

Thanks LeiweRegan, could I get you to read the instructions again please. We need them in the bottom left of your last post. Just click on the bottom left of your last post where it says 'My System Specs' That way we will be able to have them on any post you make rather than having to go hunt for them. Could I also get you to add your PSU and CPU cooler to them too.

I realize you probably think I am trying to give you a hard time, but I am not. When we deal with 30 or more cases each day and some get 10 pages long, it makes life much easier for us to not have to go back and search through 10 pages of posts when we have a question about your hardware. If the information is placed where I asked you, it will be available to us on every post you make. I think you can understand that. If there is something you don't understand, or if I give you instructions to run a test and you have questions, please feel free to ask. I do not mind answering at all.

LeiweRegan, if you would, please run memtest86+. This is how to do it. If you don't understand please ask. I don't mind at all. Take your time. It has to be run for 8 passes which will tske you about 10 hours. Do it while you sleep at night is the easiest way.

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask