Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD since installing new graphics card

14 Apr 2015   #1
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 
BSOD since installing new graphics card

Hi,
I got a used graphics card off ebay msi 460 gtx to upgrade from my geforce gt240.
installed it, connected to power supply, updated drivers all was looking good.
Desktop runs fine but halfway through loading games gets bsod every time. log attatched below...
ive uninstalled/reinstalled drivers both from disc and device manager.

any help appreciated. Thanks.

Attachment 356217


My System SpecsSystem Spec
.
14 Apr 2015   #2
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 

i put the old card back in and everything runs perfectly.
could it be a fault with the new card or something im not setting up right?
My System SpecsSystem Spec
15 Apr 2015   #3
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 

would i get more help posting this under graphics cards than BSOD help?
My System SpecsSystem Spec
.

15 Apr 2015   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
BugCheck A, {0, 2, 1, fffff80002cca116}

Probably caused by : hardware ( nt!KeRemoveQueueEx+2e6 )

Followup: MachineOwner
---------
So it is a hardware issue. And your post #2 gives a sense that the hardware is the new graphics card.

There is a fair chance that the used graphics card is faulty.

If possible, stress test that Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

This test will let us know the fact.
My System SpecsSystem Spec
15 Apr 2015   #5
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 

Thanks for the info. I'll test it when I'm home from work.
My System SpecsSystem Spec
15 Apr 2015   #6
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 

ok so ran the test, seemed to be going well then BSOD saying irql-not-less-or-equal

tried to restart pc and get message:
warning:system boot fail
your system maybe overclock fail or post interrupted.

pc restarted fine on the next attempt. should i try to run furmark again?
My System SpecsSystem Spec
15 Apr 2015   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

No. No need to run furmark anymore. It produces the same stop 0xA BSOD.

You got a bad graphics card. Better you continue with your old card. Next time dont buy any used hardware from ebay if there is no refund policy.
My System SpecsSystem Spec
15 Apr 2015   #8
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 

thanks so much for the help and info.
will attempt to return for refund.
no mention of no refund so fingers crossed....
cheers
My System SpecsSystem Spec
15 Apr 2015   #9
sov

Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
 
 

just got the same "not-less-or-equal" BSOD from the original graphics card.
this card has never had a problem until now...
any suggestions?

(off to sleep now, back tomorrow)....
My System SpecsSystem Spec
16 Apr 2015   #10
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Let us see the data following the Blue Screen of Death (BSOD) Posting Instructions?
My System SpecsSystem Spec
Reply

 BSOD since installing new graphics card




Thread Tools




Similar help and support threads
Thread Forum
BSOD after installing new Graphics Card and drivers
I recently installed a Zotac Geforce GTX1050 graphics card in my desktop PC which previously used the integrated Graphics interface on the motherboard. During the process I had to deinstall the original drivers using a Zotac utility. I got the BSOD only twice afterward however I can only run the...
BSOD Help and Support
BSOD after installing new graphics card.
Hi everyone, thanks in advance for any help you can offer to help me resolve this issue. I just bought a new computer and instead of junking my older one I was trying to upgrade the video card and pass it down to my younger brother as it is a substantial upgrade over his current rig. My...
BSOD Help and Support
New AMD Graphics Card BSOD and Drivers not Installing
I recently got a mint condition XFX 6950 2GB from ebay. The card looks great but apparently had many software issues. First, I couldn't install any of the AMD drivers without getting the BSOD related to atikmpag.sys. I fixed the problem by doing the whole expand the AMD files and moving them to...
Graphic Cards
BSOD after installing new Graphics Card
I recently installed a new gtx970-sc in my gaming rig. After random amounts of time playing games (usually over an hour), the graphics driver "nvlddmkm" stops responding. Most of the time the driver recovers but a few times it has crashed my computer to where my monitor receives no signal, while...
BSOD Help and Support
BSOD after Installing New Graphics Card - Please Help!
My system configuration is as follows - CPU - AMD Athlon II X2 240 Motherboard - Biostar TA785GE 128 MB Sideport RAM - Kingston 2 GB DDR2 8ooMhz HDD - Seagate 250GB SATAII 7200.12 Series ODD - Sony DVD-RW OS - Windows 7 Ultimate 32 Bit I recently bought a used Palit GeForce GT 240...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:41.
Twitter Facebook Google+