Hello Liquid8, and welcome to the forums. I will try to help you. I need you to do a couple of things first. Please fill out your system specs with as much detail as possible. Please include the Manufacturer and Model of the components an your PSU and CP{U cooler as well. Hopefully this will help you do that and put them in the correct place.
Please fill out your System Specs
Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.
If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task.
System Info - See Your System Specs
You have only one dump file. My debugger could not read all of the symbols, usually indicating you have a bad third party driver.
Code:
BugCheck 10D, {5, 0, 1202, fffffa800af36610}
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
This is your current driver
Code:
MijXfilt
start end module name
fffff880`06443000 fffff880`06465000 MijXfilt T (no symbols)
Loaded symbol image file: MijXfilt.sys
Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
Image name: MijXfilt.sys
Timestamp: Fri May 11 23:27:12 2012 (4FADE6A0)
CheckSum: 00022009
ImageSize: 00022000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your MotioninJoy simulate Xbox 360 controller (virtual Xinput device) Please try to find an updated driver for it.
Also, please make sure all of your Windows updates are installed and, please open an elevated command prompt ( click start, type
cmd in the search box,
right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste
sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
Let me know how these things work.
Quote