Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Help and Support

28 Apr 2015   #1

BSOD Help and Support

I'm not having any luck opening the dmp files in debugger.

My System SpecsSystem Spec
28 Apr 2015   #2

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM

BSOD Help and Support ONE BSOD Help and Support
 ATI Driver

Your ATI driver is causing issues. It's very old and needs updating, check your vendor's support page for an updated version.
fffff880`0c6b8688  fffff880`0682e000Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
4: kd> lmvm atikmdag
start             end                 module name
fffff880`07453000 fffff880`07c63000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Thu Nov 11 02:47:31 2010 (4CDB5943)
    CheckSum:         007CA581
    ImageSize:        00810000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

BSOD Help and Support TWO BSOD Help and Support

Uninstall Daemon Tools, a proven cause of BSODs.
1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and perform the following steps.
3. Double click the executable to open it.
4. Click the button shown below.

information   Information
If the button it is grayed out as shown in the image, there is no more SPTD installation on your system and you can just close the window.
My System SpecsSystem Spec

 BSOD Help and Support

Thread Tools

Similar help and support threads
Thread Forum
BSOD Help and Support
Dear Guys, Kindly help for this bugs, i had tried so many instructions from internet but did not get through :cry: use windows 7 (64 bit) and Dell XPS Regards
BSOD Help and Support
BSOD Need support with dmp files
A few days ago, I updated my ram by adding some PNY 2x8 gig cards which were supposed to be faster than my last set of cards (2x4 gig patriot viper pc3-15000) After installing that ram, my computer was much slower than before, so I put in one of my old 4 gig cards in slot 1. and started my...
BSOD Help and Support
BSOD Help and Support
Hello all. I'm new to sevenforums and am hoping to find out what is behind my BSOD! I strongly suspect that this may be a HDD failure because according to Piriform's Speccy, my HDD is running hot. In any case, I have attached the .zip file as instructed. Thank you in advance!
BSOD Help and Support
BSOD Help and Support
Daily and Nightly BSOD. Don't know where to start or what to do! Any help would be appreciated.
BSOD Help and Support
BSOD Support :(
Hey, i've used these forums a couple times now and really appreciate the help you guys have given me so far (thanks!!). Hopefully this is the last time i'm going to have to use these forums! I'm about to sell my PC, and don't want the new user to experience any of the problems I have been...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:49.
Twitter Facebook Google+