Hello, Decibull and welcome to the Forums. I will try to help you. You have a lot of dump files and I checked the last 6. Most of the showed a general hardware error but doesn't list the piece of hardware which is normal.
Code:
se !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa800c012028, bf800000, 124}
Probably caused by : GenuineIntel
Followup: MachineOwner
That is a generic hardware error meaning a component has failed/is failing or a very bad driver causing a piece of hardware to act as though it is failing.
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff800030e0555, fffff8800d8a4d40, 0}
Probably caused by : hardware ( nt!KiDeferredReadyThread+82e )
Followup: MachineOwner
There was one or two which were more specific
Code:
Use !analyze -v to get detailed debugging information.
BugCheck D1, {fffffa900d69be88, 2, 1, fffff88004008cb2}
*** WARNING: Unable to verify timestamp for e22w7x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e22w7x64.sys
Probably caused by : e22w7x64.sys ( e22w7x64+8cb2 )
Followup: MachineOwner
Which is your Killer e2200 PCI-E Gigabit Ethernet Controller. I suggest updating drivers from your Motherboard's web site for your specific board (MSI Global - The best gaming gears maker in the world). Killer networks has gone out of business, as far as I am aware and drivers are quite hard to find. Also, often times a vendor (MSI) alters drivers to work with their boards, so one from anywhere else won't work right.
The driver you currently have is
Code:
e22w7x64
start end module name
fffff880`04000000 fffff880`04027000 e22w7x64 T (no symbols)
Loaded symbol image file: e22w7x64.sys
Image path: \SystemRoot\system32\DRIVERS\e22w7x64.sys
Image name: e22w7x64.sys
Timestamp: Wed Mar 20 16:35:41 2013 (514A2BAD)
CheckSum: 00031967
ImageSize: 00027000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Also listed on 2 dumps was
Code:
fffff800`00b9a6e8 fffff880`04a13401Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x201401
Which is your Graphics card drivers. These are your current Drivers
Code:
nvlddmkm
start end module name
fffff880`04812000 fffff880`0524a000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Apr 08 15:32:37 2015 (55259065)
CheckSum: 009F7AE7
ImageSize: 00A38000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There were also references to your hard drive having errors. Please use the Samsung Toolbox and make certain your Firmware is up to date and the health of your SSD is OK. If you have any Mechanical drives please run Seatools for DOS
After updating your Network driver please reinstall/Update your Nvidia driver following this guide
NVIDIA Drivers - Avoid Problems
If you are overclocking anything, please set everything to default values. Overclocking while the computer is not stable is useless and will make finding the cause difficult, if not impossible.
Let us know how things are going after you finish with the above.