Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD usually a few minutes after boot

15 May 2015   #1

Windows 7 Professional 64 bit
Bsod irql_gt_zero_at_system_service

I've had my custom build computer for a few years now with no problems.
But recently I've started getting a lot of BSOD. They seem to appear at random times, but usually it's within a few minutes of boot. I don't know what's causing them, but I was hoping you guys could help figure that out :)

Thanks in advance :)

My System SpecsSystem Spec
15 May 2015   #2

Windows 7 Home Premium 64-Bit SP1

Hello and welcome to the sevens forum, lets help the BSOD experts a little.

1. Have you ran a full scan with your security.

2. Have you replaced any hardware and are you overclocking your computer.

3. Any new software that's been installed.

A BSOD expert will look at your problem and then give you the tools to fix the problem
My System SpecsSystem Spec
16 May 2015   #3

Windows 7 Professional 64 bit

Yes, and it comes up with nothing

No, I've not replaced any hardware, and I'm not overclocking.

The only addition that I can think of would be the driver for my xbox 360 wireless controller.
My System SpecsSystem Spec

16 May 2015   #4

Windows 7 Professional 64 bit

Here's an image that I took of the bluescreen.
This one happened at the login screen, before I typed anything in.
My System SpecsSystem Spec
16 May 2015   #5

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM

Your Marvell 91xx SATA 6G Controller driver has been flagged. It's old and needs updating, check for an update here.
fffff880`0a82e308  fffff880`01090773Unable to load image \SystemRoot\system32\DRIVERS\mv91xx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mv91xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys

2: kd> lmvm mv91xx
start             end                 module name
fffff880`0106a000 fffff880`010f6000   mv91xx   T (no symbols)           
    Loaded symbol image file: mv91xx.sys
    Image path: \SystemRoot\system32\DRIVERS\mv91xx.sys
    Image name: mv91xx.sys
    Timestamp:        Fri Aug 27 10:49:22 2010 (4C778A22)
    CheckSum:         00050BB0
    ImageSize:        0008C000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Avast is also showing as troublesome. Uninstall Avast and install MS Security Essentials and MalwareBytes.

Note   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.

IMAGE_VERSION:  6.1.7601.18798

FAILURE_BUCKET_ID:  X64_RAISED_IRQL_FAULT_AvastSvc.exe_nt!KiSystemServiceExit+245

BUCKET_ID:  X64_RAISED_IRQL_FAULT_AvastSvc.exe_nt!KiSystemServiceExit+245


FAILURE_ID_HASH_STRING:  km:x64_raised_irql_fault_avastsvc.exe_nt!kisystemserviceexit+245

FAILURE_ID_HASH:  {eecb07f4-730f-e646-5522-64c95a26c0dd}

Followup: MachineOwner
My System SpecsSystem Spec
16 May 2015   #6

Windows 7 Professional 64 bit

Thanks for your help :)

I was unable to locate a new driver for my marvell controllers, so I moved my HDD to the Intel controllers on my motherboard.

Thanks again for the help :)
My System SpecsSystem Spec
16 May 2015   #7

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM

You're welcome. Let us know of any further issues.
My System SpecsSystem Spec

 BSOD usually a few minutes after boot

Thread Tools

Similar help and support threads
Thread Forum
2 minutes to boot to desktop and minutes more fot hard drive activity
ever since I got the laptop it takes almost 2 minutes to boot to the desktop. It then continues to show hard drive read activity without blinking for 6+ minutes. What tests can I run to find out the cause? this happened since the first boot times and even after factory resets. ...
Performance & Maintenance
BSOD 9f a few minutes after boot, hang on boot/shutdown sometimes...
The BSOD doesn't always happen, but it happens maybe once a week. The BSOD info file shows the following: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601. Locale ID: 1033 Additional information about the problem: BCCode: 9f
BSOD Help and Support
BSOD within a few minutes of boot
After booting, the computer is usable for a few minutes, then the system goes to a 100% (freezes momentarily) then blue screens. Any help would be appreciated.
BSOD Help and Support
BSOD 5-60 minutes after boot
Good day, all. My MSI laptop running Windows 7 Professional 64-bit has been having BSOD after 5m-~1hr of running. My computer had been having increasing events like this recently, which lead to me formatting and reinstalling Windows in the last week having suspected some software issue (no I...
BSOD Help and Support
BSOD minutes into boot
I just built a brand new sytem, minutes into loging in the sytem crashes displaying a BSOD with Memory_management as the reason. - upload your files to multiple file hosting sites! (link to Minidump File) I have run Memtest and windows memory test and both came back with no...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:18.
Twitter Facebook Google+