BSOD playing ESO, BCCode a.

NoelDP said:

That looks a lot better!
SFC is now clear, and SFCFix shows exactly what it should.

I'll hand you back to Steve (essenbe) now

Cool deal, thanks!

Was in bed early last night and didn't run memtest. (again...)

Received yet another BSOD (PNF_LIST_CORRUPT; BCC 4e) just a bit ago, attaching the .zip containing logs and whatnot. Afterwards, I'm going to restart and run mentest despite how long it may take. Getting pretty tired of wondering when the next BSOD or crash is going to happen.

I'll get back to the thread once it's complete. (errors or otherwise)

Edit: Currently on the laptop while memtest runs. The good news is, I guess, that my memory is still under warranty (thanks, G.Skill lifetime warranty!), so if some/all of it is faulty, I can at least RMA it.

essenbe said:

here's what the dump file says.

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 4E, {2, 189c0, 1dffff, 1}
Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+8d )
Followup: MachineOwner

Was afraid of that. Memtest is still running, though. It's almost through pass 3, with no errors so far.

Still got a long while to go, though.

Day 47. Memtest still continues. Running low on supplies, send help.

But seriously, it's almost done with pass 9 (it's about 60% in to the final test of the pass) and it's found zero errors so far.

I'm not sure whether to leave it go over night (for a near-20 hour run; it's at just over 11 hours now) or stop it now and try something else, like cleaning the contacts on the memory with some isopropyl alcohol and reseating it.

Unfortunately, I didn't see your request for a picture before I had to end it. Storms rolling through forced me to stop it, shut down, and unplug things. Thanks to shoddy wiring in this house, I've lost various electronic devices to lightning (including half the I/O panel of the last PC), and I'm not willing to risk this. haha

But it was done with pass 9, 12% in to pass 10, with 0 errors. Over where it displayed the time it had ran (on the right) it said "0 Errors", and there were no changes below the SPD listings on the bottom half of the screen.