BSOD when using CIMCO program (0x0000007A)

Page 2 of 2 FirstFirst 12

  1. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       New #11

    All the BSODs happened during using CIMCO Edit V7.
    Code:
    OVERLAPPED_MODULE: Address regions for 'aksfridge' and 'IntcDAud.sys' overlap

ERROR_CODE: (NTSTATUS) 0x1100 - The remote storage service encountered a media error.
    It looks like a storage failure, but in that case it should happen elsewhere too; which is not happening apparently.

    Try a complete uninstallation of CIMCO and reinstall it? See how it goes.
      My Computer
    Quote Quote

  3. lolrealism
    Posts : 8
    7 32/64bit
    Thread Starter
       New #12

    So I did an uninstall and reinstall. We tried to use the transmit again and it worked fine, however the data did not to go the machine since my end user plugged in the wrong usb . Once he corrected that, the blue screen reappeared.
      My Computer
    Quote Quote

  4. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       New #13

    It appears overall that the issue is from CIMCO's part. Can you talk with their service?
      My Computer
    Quote Quote

 
Page 2 of 2 FirstFirst 12

  Related Discussions
BSOD 0x000000f4 and 0x0000007a
in BSOD Help and Support

My computer started randomly blue screening a couple months back, it started off every couple weeks but now it crashes every couple of hours. Its almost always a 0x000000f4 error code, but every once in a while theres a 0x0000007a code too. I ran a memory test and it found nothing wrong with the...
BSOD 30s after startup 0x0000007A
in BSOD Help and Support

DSOD appears in about less than minute after desktop shows. I was able to get logs in safe mode. Stop code: ***STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFc000009D, 0xFFFFFA8006248078, 0x0000000000000000) I'm using Windows 7 Home Premium 64bit Service Pack 1 and didn't install anything...
BSOD error 0X0000007A
in BSOD Help and Support

Hello, I just got my first BSOD today. And now it happens every hour or so. I'm not sure what to do. I have all the necessary files attached, I believe. Thank you for any help you can give.
BSOD uninstalling program, 0x0000007a
in BSOD Help and Support

Hi, On my Netbook I've just had the KERNEL_DATA_INPAGE_ERROR bluescreen. I've checked my drivers and made sure their updated, but it still gives me the error. Please help I can still get into normal windows mode aswell as safe mode
BSOD doing nothing, error 0x0000007A
in BSOD Help and Support

I was just dozing off since it was late and when i woke up to turn off my rig it gave me this BSOD. I googled the problem and most says its caused by bad sectors. One of my HDD monitoring software says it has 1 bad sector. I've run memtest before for 16 hours+ and it gave me no error so it's...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 19:24.
Find Us