New
#1
BSOD while playing gta 5
hey guys every now and then when playing gta 5 I get the bsod
please see attached file TIA
hey guys every now and then when playing gta 5 I get the bsod
please see attached file TIA
Hello and welcome Peter mate there are errors for the graphics and I would advise that you uninstall the Catalyst Control Centre if you have it on board first.
My other question is have you recently updated the GPU card? if not it is worth reseating the device mate. See below file dump readout.
Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* PAGE_FAULT_IN_NONPAGED_AREA (50) Invalid system memory was referenced. This cannot be protected by try-except, it must be protected by a Probe. Typically the address is just plain bad or it is pointing at freed memory. Arguments: Arg1: fffff8b019ee5018, memory referenced. Arg2: 0000000000000000, value 0 = read operation, 1 = write operation. Arg3: fffff8800f587a00, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000005, (reserved) Debugging Details: ------------------ Could not read faulting driver name READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000430a100 GetUlongFromAddress: unable to read from fffff8000430a1c0 fffff8b019ee5018 Paged pool FAULTING_IP: atikmdag+17da00 fffff880`0f587a00 8b4108 mov eax,dword ptr [rcx+8] MM_INTERNAL_CODE: 5 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT BUGCHECK_STR: 0x50 PROCESS_NAME: GTA5.exe CURRENT_IRQL: 0 ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre TRAP_FRAME: fffff8800aeacf30 -- (.trap 0xfffff8800aeacf30) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=fffff8a019ee8000 rbx=0000000000000000 rcx=fffff8b019ee5010 rdx=fffff8a01a3e8000 rsi=0000000000000000 rdi=0000000000000000 rip=fffff8800f587a00 rsp=fffff8800aead0c8 rbp=00000000000002cf r8=00000000000002cf r9=fffffa80122663e0 r10=fffffa800c7ea270 r11=00000000001f0003 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz na pe nc atikmdag+0x17da00: fffff880`0f587a00 8b4108 mov eax,dword ptr [rcx+8] ds:fffff8b0`19ee5018=???????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff800041477aa to fffff800040cd8c0 STACK_TEXT: fffff880`0aeacdc8 fffff800`041477aa : 00000000`00000050 fffff8b0`19ee5018 00000000`00000000 fffff880`0aeacf30 : nt!KeBugCheckEx fffff880`0aeacdd0 fffff800`040cb9ee : 00000000`00000000 fffff8b0`19ee5018 fffff800`04040400 fffff8b0`19ee5010 : nt! ?? ::FNODOBFM::`string'+0x3fda1 fffff880`0aeacf30 fffff880`0f587a00 : fffff880`0f4cf50f fffff8a0`1a3e8000 00000000`00000001 00000000`00000000 : nt!KiPageFault+0x16e fffff880`0aead0c8 fffff880`0f4cf50f : fffff8a0`1a3e8000 00000000`00000001 00000000`00000000 00000000`00000000 : atikmdag+0x17da00 fffff880`0aead0d0 fffff8a0`1a3e8000 : 00000000`00000001 00000000`00000000 00000000`00000000 fffff8a0`1a3eb0b8 : atikmdag+0xc550f fffff880`0aead0d8 00000000`00000001 : 00000000`00000000 00000000`00000000 fffff8a0`1a3eb0b8 fffff880`0f53b72b : 0xfffff8a0`1a3e8000 fffff880`0aead0e0 00000000`00000000 : 00000000`00000000 fffff8a0`1a3eb0b8 fffff880`0f53b72b fffffa80`11567980 : 0x1 STACK_COMMAND: kb FOLLOWUP_IP: atikmdag+17da00 fffff880`0f587a00 8b4108 mov eax,dword ptr [rcx+8] SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: atikmdag+17da00 FOLLOWUP_NAME: MachineOwner MODULE_NAME: atikmdag IMAGE_NAME: atikmdag.sys DEBUG_FLR_IMAGE_TIMESTAMP: 551b0419 FAILURE_BUCKET_ID: X64_0x50_atikmdag+17da00 BUCKET_ID: X64_0x50_atikmdag+17da00 ANALYSIS_SOURCE: KM FAILURE_ID_HASH_STRING: km:x64_0x50_atikmdag+17da00 FAILURE_ID_HASH: {855e2253-929e-a96e-05de-b231efcdea54} Followup: MachineOwner
SLOT CLEANING
Now as for the slots toclean them use a strip of old credit card (or any card thin enough some arebetter than others ) about 1/2 inch wide nip the corners off one end - preferably round them offhold a piece of thin lint free cloth over theend dab on some form of alcohol - isopropyl alcohol (what we swab the skin withbefore an injection) is good and GENTLYswipe along the slots.
This can also be done for the GPU slot/s andalso the contacts of the sticks or cards - not the stick but some lint freecloth of course. See my pic for the sick but please be very gentle doing it ifyou are in any doubt - please ask before doing it but I use this all the timeand have yet to damage anything
thanks for the info it is a new board so I don't think it needs cleaning but uninstalled catalyst so ill see how it goes now