Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: atikmpag.sys booting BSOD

21 Jun 2015   #21
hiho7

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Attachment 363429
Attachment 363430
Attachment 363431
Attachment 363432
Attachment 363433


My System SpecsSystem Spec
.
21 Jun 2015   #22
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Please download GPUz (GPU-Z Video card GPU Information Utility) and post a screenshot of the first page. On the main page, about half way down on the right you will see 'Bus Interface' and a question mark next to it. Tell me what it says when you first open it up. Then click the question mark and start the render test and tell me if it changes, and what it changes to.
My System SpecsSystem Spec
21 Jun 2015   #23
hiho7

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hovering on the "Bus Interface - PCI-E 1.1 x16 @ x2 1.1" says that the video card supports PCI-E 1.1 x16 @ x2 1.1 but is running on PCI-E 1.1 x2 @ x2 1.1. Is this what you wanted?

About the test - how long should I wait? Ran it for a minute or two, nothing changed.

Attachment 363437
Attachment 363438
My System SpecsSystem Spec
.

21 Jun 2015   #24
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

yes, your video card is running at X2 and should be running at X16 What slot is the card in? It should be in the X16 slot closest to the CPU.
My System SpecsSystem Spec
21 Jun 2015   #25
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Is this your Motherboard? If so, you only have 1 X16 slot.

Attachment 363445

You need to find someone who will loan you a GPU to test. Also, please go to BIOS and give me the values of your +12V, +5V and +3.3V.
My System SpecsSystem Spec
22 Jun 2015   #26
hiho7

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Yes, this is it. About the values - I couldn't find the 5v one, but the other ones are 12.048 and 3.30.

I'll try to find another GPU.

Today the computer woke up normally.
My System SpecsSystem Spec
22 Jun 2015   #27
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Those values are good. I would just borrow a card and not buy one. It could be the card or the motherboard. You could try removing the card, blowing out the pcie slot with a can of compressed air and reinstalling the card.
My System SpecsSystem Spec
23 Jun 2015   #28
hiho7

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I'll try in the next 12 hours (or so) with an old nvidia card and then'll get back to you. Is that ok?

Btw, yesterday the pc couldn't even be slept, waited a couple of minutes but it didn't 'turn off'. Just a black screen on the monitor. No BSOD occurred tho.
My System SpecsSystem Spec
23 Jun 2015   #29
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Ok, that will be good. I may try it a little longer unless you are having the same problem. Sometimes it is strictly a function of BIOS. But, I want to see if it is the card.
My System SpecsSystem Spec
23 Jun 2015   #30
hiho7

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok, what do you want me to do when I get it? Just try the sleep/wake up functions? Or you have something else in mind?
My System SpecsSystem Spec
Reply

 atikmpag.sys booting BSOD




Thread Tools




Similar help and support threads
Thread Forum
BSOD atikmpag.sys
*MY LAPTOP HAS A SWITCHABLE GRAPHICS CARD* I uninstalled both AMD RADEON HD 7600M Series (Dedicated GPU) & INTEL HD 4000 (Motherboard GPU) fully + the registries. The Laptop recognizes the total available video memory of the 2 GPU's when both of the drivers are in VGA mode. I downloaded &...
BSOD Help and Support
BSOD on atikmpag.sys
I have a BSOD on atikmpag.sys. I read another thread on this forum, but I don't know if my symptoms are the same. There was a hex code reported in the other thread, and I couldn't find that anywhere in my listings. I was viewing the report from Dell's PC-Doctor program, so maybe that didn't...
BSOD Help and Support
BSOD when CCC booting, atikmpag.sys
Hello! I've been getting BSODs everytime I start my laptop, when Catalyst Control Center launches. I reinstalled windows and everything, tried multiple times to reinstall my drivers, with different versions (I'm using leshcatlabs unifl packed drivers, which worked really great until 4 days...
BSOD Help and Support
BSOD when booting, atikmpag.sys error
Hi can anyone please help me, I installed fresh windows on an new Hdd and installed my graphic card driver and restarted then after windows logo shows I get BSOD.. :( only way to use it now is in safemode :huh: Acer Aspire 5552G Specs OS: Windows 7 Gamer (Based on Windows 7 ultimate)...
BSOD Help and Support
BSOD 116 atikmpag.sys
Well only when i play games i take bsod, it freezes sometimes if i press ctrl+alt+del then it maybe unfreeze and sometimes it shows a message display driver stopped and restored or something like that. i checked the guide here:...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:55.
Twitter Facebook Google+