New
#1
BSOD 0x000000f4
recently built a computer and after installing all drivers im receiving BSOD for unknown reason.
Seems to happen randomly and not during anything specific.
DMP zip included.
recently built a computer and after installing all drivers im receiving BSOD for unknown reason.
Seems to happen randomly and not during anything specific.
DMP zip included.
As the starting point, please follow this post to disable Samsung Rapid mode.
Then report us for any further BSOD.
____________________________________________________
Code:BugCheck F4, {3, fffffa8011a6c060, fffffa8011a6c340, fffff800033c0e20} ----- ETW minidump data unavailable----- Probably caused by : wininit.exe Followup: MachineOwner ---------
this seemed to work for a while, i currently work away from home 2weeks out of 3, i've started getting BSOD again recently and nothing has changed.
I've attached the latest log collection to this post.
The same issue is continuing.
Please provide a screenshot of Samsung Magician Showing Rapid Mode is disabled.
If we get to know it with certainty that Rapid Mode is disabled, then we can proceed to further troubleshooting.
________________________________________________________
Code:BugCheck F4, {3, fffffa800d81fb10, fffffa800d81fdf0, fffff80003388e20} ----- ETW minidump data unavailable----- Probably caused by : csrss.exe Followup: MachineOwner ---------
screenshot attached Arc.
I disabled this as soon as you advised last time.
Now, for a stop 0xF4, observe if it is anyhow concurrent with the hybernate-sleep power transition. If so, dont let the SSD to go to sleep, keep it away of the power plan settings.
As you have magician installed, I hope the firmware is already up to the date, but make it sure, too.
Also post a screenshot of the ssd using CrystalDiskInfo.
i have toggled so that the computer and hdd shouldnt sleep. pretty sure ive done it right.
Firmware is up to date.
screenshot of crystaldisk info attached for you.
still receiving this problem.
Id also get more ram youve only got the bare minimum of 2.
Roy
this may be a ram issue then? i have 4x 4gb sat in there at the minute =/
Both of the screenshots only show 2?, are they seated properly.
Roy