Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Every time i turn on my computer

10 Jul 2015   #1

win 7 profesional
BSOD Every time i turn on my computer

hello there, im having this problem since 1 month ago. every time i turn on my computer in the bios logo the screen look like having a brick, like when your tv have bad signal. and then in the windows logo there is two line of coloumn. after that the screen goes black and the computer restarting automatically. after this the computer the eror is gone and the computer can run normally. but i got this system message

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA80094B9010
BCP2: FFFFF8800460B848
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Users\stefz christ\AppData\Local\Temp\WER-49623-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

this happen every time i turn on my computer and also sometimes my computer screen goes black and i cant do anything but restarting or force shutdown it. Any help would be greatly appreciated
thank you very much

My System SpecsSystem Spec
10 Jul 2015   #2

Windows 10 Professional x64

Hiya and welcome to SevenForums!
BugCheck 116, {fffffa80094b9010, fffff8800460b848, 0, 2}

Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+b848 )
The problem is caused by your graphics driver. Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again and you should be good to go! This is the guide for DDU: Drivers - Clean Left over Files after Uninstalling
My System SpecsSystem Spec
13 Jul 2015   #3

win 7 profesional

hello sir laith, yesterday i try to follow your instruction. but the problem wont disappear.
My System SpecsSystem Spec

14 Jul 2015   #4

Windows 10 Professional x64

My System SpecsSystem Spec
14 Jul 2015   #5

win 7 profesional

sir now i cant even get into the login screen.... using safe mode i manage get past it and uninstal my vga.. but even when im not using vga the problem wont disappear..
in my monitor there is white diagonal line sometimes the line become greenblueredyellow line.
im screenshooting my monitor and try open the picture in laptop but when i see it the picture turn to be normal...

the problem disappear when i install(no white line, completely clean) my vga driver again.. but the next day the problem come again...
after that i try furmark an then when the temp hit 85c something went wrong, thereis black line and the screen broken so i decide to stop the furmark and restarting the computer
My System SpecsSystem Spec
15 Jul 2015   #6

Windows 10 Professional x64

This sounds like a failing GPU. I think you must replace the GPU.
My System SpecsSystem Spec

 BSOD Every time i turn on my computer

Thread Tools

Similar help and support threads
Thread Forum
BSOD every time I turn off my computer
Same thing when I attempt to restart it. It also gives me the BSOD every now and then (about once a week) upon start up. It runs pretty fine other than that, so I'm not sure what other info to give.
BSOD Help and Support
Computer takes a long time to turn on...
Recently I been having issues with my computer. Everyday I power my acer on . It displays a messages. It takes me about 30 minutes for me to get everything working again . here are the images I provided . It's really getting annoying . I do what screen tells me to do. After like repeating the...
General Discussion
BSOD After each time I turn on my computer from standby or hibernation
It is very annoying as my computer can not successfully be in sleep for or hibernation mode for long periods of time. Once I turn it on, it either loads into windows (usually the case), then it shortly freezes and shows the following error message. Once in a while it would go straight to the...
BSOD Help and Support
Different BSOD every time I turn on computer
Please help. Every time I turn on computer I receive a different BSOD. I can't even give my computer info because I haven't been able to stay on it long enough. The following are the BSOD that I just received in the last hour. IRQL_NOT_LESS_OR_EQUAL PAGE_FAULT_IN_NONPAGED_AREA BAD_POOL_HEADER...
BSOD Help and Support
19 updates every time I turn off my computer; all fail
Good evening! I have problems with Windows 7 updates. Every time I turn off my computer, I have 19 updates and they all fail. Mostly Security Updates and some others. I have tried the Fix Its and troubleshooting, but nothing seems to help. Hereby I have attached my failed update log....
Windows Updates & Activation
Computer date and time changes everytime I turn it on
Hey guys. With my desktop pc, everytime I turn it on the date and time is always not what it should be. A few moments ago the date was I think 25th of November 2006 and the time was way off what it is now. The date actually usually does reset to 2006 but haven't noticed if it's the same day/month...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:01.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App