BCCode 50, numerous BSOD after turning computer on

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

Code:

BugCheck 50, {fffff9811aa826a8, 0, fffff88001456e00, 5}


Could not read faulting driver name
Probably caused by : Ntfs.sys ( Ntfs!memcpy+250 )

Followup: MachineOwner
---------

Test your RAM modules for possible errors.

How to Test and Diagnose RAM Issues with Memtest86+

Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. A camera snap of the memtest86+ screen before closing the program will be nice.

This image does not include all the required fields to infer about the result of the test.

Attachment 367371

Next, search for a driver which may pass bad info to the memory. Enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

This one is not seeming to be verifier enabled.

Code:

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

This string would mention about the verifier in that case.