Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: 5min shut down Screen/BSOD on restart but ok on pwr cyc

11 Nov 2009   #1

xp, vista, 7
5min shut down Screen/BSOD on restart but ok on pwr cyc

Separate issues I believe...

It seems that once configured for my work domain (doesn't happen at home...but different PC) shut down hangs for approximately 5min at the shutting down screen.

BSOD on restart but no BSOD on shut down and restart (power cycle)...This seems to happen only after installing the latest nvidia driver on all video cards (2 x 295's in SLI and a single 7200 GS).

7 pro x64 (Release)...up to date on updates from Microsoft Update
2 x nvidia gtx 295's in SLI (Driver
1 x nvidia 7200 GS (Driver
2 x Intel 160g ssd's (raid 0)
12g Corsair DDR3
Intel i7 3.2g cpu
Gigabyte EX58-Extreme mobo

Thanks Bradey
My System SpecsSystem Spec
11 Nov 2009   #2

7600.20510 x86

Try a static ip for the nic.
My System SpecsSystem Spec
11 Nov 2009   #3

xp, vista, 7

Sorry for my ignorance...I believe it is a static IP (well my TCP/IPv4 has a static IP)...Can the NIC have an separate/additional IP (maybe in the location of the ss)???
My System SpecsSystem Spec

11 Nov 2009   #4

7600.20510 x86

That screenshot show the mac address config box. No changes there are necessary.

You can Google for how to set a static ip address in relation to IPv4 for the NIC (lan adapter).
My System SpecsSystem Spec
12 Nov 2009   #5

xp, vista, 7

IP was/is static (TCP/IPv4)...unless I'm not understanding something about another way to have a "static IP for the nic"
My System SpecsSystem Spec
12 Nov 2009   #6

7600.20510 x86

Here, I copied and pasted from another thread I posted in:

"Go to Network and Sharing Center. Click local area connection. Click Properties. Double click Internet Protocol Version 4 (TCP/IPv4).

Set it as follows:

Ip address = same as router config page, usually or but change the last part to 150 -

for example, if router is make ip address
if router is make ip address

Subnet mask =

Default gateway = router's config page address same as before ( or

Preferred dns server = same as router's config page (or if that fails)

Hit ok. Test. Disable then enabled the adapter. Test."
My System SpecsSystem Spec
12 Nov 2009   #7

xp, vista, 7


sorry for the confusion and thanks for the info...however the TCP/IPv4 is and has been set up as a static IP...I was just curious if I was missing something or if there was something additional that was I don't think the static IP is the issue as there are others with and without a static IP in my office and the problem is consistent with both.
My System SpecsSystem Spec
12 Nov 2009   #8

7600.20510 x86

Ah alright.

If you'd like, we can take a look at the crash dumps. They're located at C:\Windows\Minidump

Zip or Rar them, then attach to a post using the paperclip. You might have to copy them to another folder first before compressing.
My System SpecsSystem Spec
12 Nov 2009   #9

xp, vista, 7

Mini dumps
My System SpecsSystem Spec
12 Nov 2009   #10

7600.20510 x86

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [E:\Temp\Rar$DI00.453\103009-16130-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*
Executable search path is: 
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a09000 PsLoadedModuleList = 0xfffff800`02c46e50
Debug session time: Fri Oct 30 09:05:21.342 2009 (GMT-5)
System Uptime: 0 days 0:00:31.326
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 101, {19, 0, fffff880009b2180, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner

0: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009b2180, The PRCB address of the hung processor.
Arg4: 0000000000000004, 0.

Debugging Details:






fffff880`066878e8 fffff800`02a27443 : 00000000`00000101 00000000`00000019 00000000`00000000 fffff880`009b2180 : nt!KeBugCheckEx
fffff880`066878f0 fffff800`02a835f7 : fffffa80`00000000 fffff800`00000004 00000000`00026160 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x4e3e
fffff880`06687980 fffff800`02ff0895 : fffff800`03015460 fffff880`06687b30 fffff800`03015460 fffffa80`00000000 : nt!KeUpdateSystemTime+0x377
fffff880`06687a80 fffff800`02a773f3 : 00000000`c91f0510 fffff880`05323e18 00000000`00000000 fffff880`03088180 : hal!HalpHpetClockInterrupt+0x8d
fffff880`06687ab0 fffff800`02a3caa3 : fffff880`03088180 fffff800`02a7f071 fffff880`05323d70 00000000`00000000 : nt!KiInterruptDispatchNoLock+0x163
fffff880`06687c40 fffff800`02a81a3f : fffff800`02bf3e80 00000000`00000002 00000000`00000000 00000000`00000000 : nt!KxWaitForSpinLockAndAcquire+0x23
fffff880`06687c70 fffff880`04a2990a : 00000000`00000000 fffff880`06687d00 00000000`00000008 fffffa80`00000000 : nt!KeAcquireSpinLockAtDpcLevel+0x6f
fffff880`06687cc0 00000000`00000000 : fffff880`06687d00 00000000`00000008 fffffa80`00000000 fffff880`03093000 : nvlddmkm+0x15e90a



FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME:  Unknown_Image




Followup: MachineOwner

That really sounds like something a bios update should take care of. So ya, try to visit the motherboard manufacturer's site to see if there's an update for bios and install it according to their specific instructions.

Let us know how it goes.
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
BSOD whenever i want to restart or shut down my pc.
Hi Guys, I get a BSOD whenever i try to restart my pc, i use a HP 5103, attached herewith is the last dump file. thanks for your prompt response.
BSOD Help and Support
BSOD after shut down/restart
Need help fixing BSOD. It happens everytime I restart or shutdown my computer. Uploaded the dmp files onto a zip folder. Can someone help me out bcmwl664.sys bcmwl664.sys+3f737 fffff880`04a10000 fffff880`053d1000 0x009c1000 0x541ab957 9/18/2014 4:52:07 AM ...
BSOD Help and Support
8100 runs 1 hr blue screen shut down flashing power button restart
Dell 8100 runs properly for about an hour, then a blue screen shows. I power off the system. When I try to reboot the power button flashes amber and will not boot. When I leave the system off for a few hours, it will restart.
BSOD Help and Support
Problem freezing PC on loggoff screen when attemp shut down or restart
Hi everyone, I have a problem with my PC since I reinstalled windows 2 days ago. I used IObit driver booster to update my drivers and when I try to restart or shut down PC, the logoff screen is freezing and it will never reboot or shut down if I dont press the power button . I unistalled all...
General Discussion
BSOD & Mem Dump on every shut down & restart
Hi and thank you in advance for looking over this problem for me. I can provide you with any additional information you may need. Below is what information comes to mind as of right now and the things I have done to try and correct this issue already. This version of windows is a fresh...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:34.
Twitter Facebook