Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD random, fresh windows install

14 Sep 2015   #11

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10

Now I did say last post that it could be software and that doesn't mean it is and by doing the basic stuff first is just a matter of elimination because the dump fault is ambiguous to say the least.

Now I know you have done a fresh install but I would still run those scans in case the install did not go a well as it may appear to have done. If the results come back ok then we can strike that cause of the list.

Same goes for the malware scans.

Now also can you now update the system specs please as it is really needed now to look at the hardware too. System Info - See Your System Specs because there is also a set list of components I like to look through first. For example this is one that I like to see run first up on the PSU

Using HW Info


You can test the volts onthe PSU with HW Info HWiNFO,HWiNFO32/64 - Download <download the right bit version and close the right hand window select Sensorsand scroll down to the power section where you will see what the volts aredoing see my pic. In my pic the section (Nuvoton)with VBATT is a dead give away you are in the section for the rail voltages.There are other section titles and one that pops up often is ITE

Now the voltage on thedifferent rails have to be within 5% =+/- of what is required or the machinewill not work properly if at all.

See this for the railvoltage info,3061.html (Section 2.)

The original right handwindow shows the machine running and is handy for that but for looking at thecomponents in some detail close it and use the main left hand side panel



Open each small squarewith + in it on the section the components are in and then click on theindividual component/s (it willhighlight in blue) - in the right hand side will appear all sorts of detailsincluding brands speeds and other essential info that particular device. Seepic for example.

This is one component often overlooked - that if out of whack can and will shut down the machine or even not let it start up.

To send snips see this Screenshots and Files - Upload and Post in Seven Forums

My System SpecsSystem Spec
14 Sep 2015   #12

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

I haven't BSOD'd since I did the system check. I also updated my system specs and I linked a link of the exact computer I have bought earlier in the thread.
My System SpecsSystem Spec
14 Sep 2015   #13

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10

Ok mate well perhaps the disk check has corrected something and it might as be that we let the machine run as is and see what happens. Like I aid earlier this dump issue is one that is ambiguous and can be either - or when it comes down to hard and soft wares.

Keep us posted:)
My System SpecsSystem Spec


 BSOD random, fresh windows install

Thread Tools

Similar help and support threads
Thread Forum
Windows 7 Fresh Install, random BSOD
I've had this computer for about a year and a half now and it has always just randomly BSOD'ed. I recently tried going into command prompt and running "chkdsk /r" and that didn't seem to work. Even after I re-installed W7 (ultimate x64) about 3 months ago, it didn't seem to help anything. It rarely...
BSOD Help and Support
Random freeze and BSOD even after fresh install of windows 7
Hello, this is my first post in sevenforums. i have been facing a terrible problem lately. After just a regular windows installation My pc performance became extremely poor and hangs frequently, it either hangs or restarts showing bsod. About 6 times per hour (just imagine how annoying that can be...
BSOD Help and Support
Random BSOD after fresh install of Windows 7 on a SSD.
Just reinstalled Windows on a new Samsung PM 830 SSD. Can't tell if its the SSD or the other things that I have installed. Sometimes it gives the BSOD screen, sometimes Explorer just goes missing and Task Manager would be unavailable. These days the BSODs come more often and with little...
BSOD Help and Support
random BSOD 0xc0000005 -fresh Windows 8 x64 install
Hello, I am getting BSOD for a few weeks now, before that my PC was working fine. I have not added any new component recently. I have fully installed the OS (Windows 7 x64) a couple of days ago, but still get BSOD randomly. I don't get any BSOD when I am in safe mode. I have tried...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:09.
Twitter Facebook Google+