Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD persists after restore to factory Acer M5-581t Laptop

30 Sep 2015   #1

win 7 64
BSOD persists after restore to factory Acer M5-581t Laptop

Hello. I'm working with an Acer M5-581t, I5, 6gb ram. This model has the 20gb SSD for fast wake/cache. It was blue-screening there for awhile, so I restored it to factory. The problem didn't go away. Not sure where to go with this "pool corruption" bsod. Thanks for any advice. :)

My System SpecsSystem Spec
01 Oct 2015   #2

Windows 10 Pro

Hi krrrrazyk,

Welcome to the 7forums.

Please check C:\Windows\Minidump\, are there dumps saved after 09/17?
If so, please zip them and upload them.

Checking the dump from 09/17, the cause is the Intel(R) USB 3.0 eXtensible Host Controller
Please make sure you have installed every driver from your manufacturer.
*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys

1: kd> lmvm iusb3xhc
start             end                 module name
fffff880`0486e000 fffff880`04933000   iusb3xhc T (no symbols)           
    Loaded symbol image file: iusb3xhc.sys
    Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
    Image name: iusb3xhc.sys
    Timestamp:        Tue Mar 27 10:09:32 2012 (4F7175BC)
    CheckSum:         000C657E
    ImageSize:        000C5000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
01 Oct 2015   #3

win 7 64

Thanks for the reply axe0. There aren't any minidumps after 09/17. This is a factory restore, so all drivers are in place. I'll update that USB driver and test. Please post if you have any other thoughts.
My System SpecsSystem Spec

19 Oct 2015   #4

win 7 64
Problem solved. User error

I found out the user was not safely removing hardware while working frequently with a assorted flash drives. One or more of them got corrupted. Not sure when the bsods occurred, but for sure, it was while she was using it or during after the removal.
My System SpecsSystem Spec
20 Oct 2015   #5

Windows 10 Pro

That is the reason why the USB driver was flagged.

Nice find :)
My System SpecsSystem Spec

 BSOD persists after restore to factory Acer M5-581t Laptop

Thread Tools

Similar help and support threads
Thread Forum
Acer TimelineU M5-581T| UEFI| Windows 7 install hangs at Logo
hi, i am having a peculiar problem with my newly purchased Acer TimelineU M5-581T laptop. it has 20GB SSD and 500GB HDD and UEFI MB also supports legacy BIOS. it came with Windows-8 pre-installed and had a single drive C:. i needed to partition it and had created drive D: with windows disk...
Installation & Setup
BSOD persists after System Restore, error 0x000000F4
My laptop seems to have taken a shining to the colour blue today. I had some KERNEL_DATA_INPAGE_ERRORs this morning, which popped up after some install/uninstall issues. Followed this up with a System Restore. Those BSODs were replaced by a video driver failure BSOD which was repaired by installing...
BSOD Help and Support
trying to factory restore acer aspire one d255 but....
on the last part it says installing sysprep - factory mode 52/52 complete, but is stuck on here for a long time. help this is the second time I'm trying to restore it.
Installation & Setup
Acer Aspire Desktop failed to restore factory settings
I have an Acer Aspire AX3400 desktop running Windows 7 64bit. I have been having all sorts of problems over several months. The machine, when left unattended, appears to be always "recovering from serious error" with subsequent memory dumps. The machine would not shut down without me having to...
Installation & Setup
is there any way to factory restore an acer without using erecovery?
everytime i try to factory reset my pc with erecovery managment, it never finishes once it gets to the end, it will say installing sysprep - factory mode, 52/52 and never finishes after that. is there any third party software that can factory restore my system? i noticed windows boots just fine...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:30.
Twitter Facebook Google+