Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD x19 when installing Sata driver

08 Oct 2015   #1

Windows 7 64bit ond others
BSOD x19 when installing Sata driver

Getting always BSOD x19 Bad_pool_header connected with ntoskrnl on inter SATA driver.

I can go to safe mode and sytem works well.
When in safe mode I delete SATA driver Intel AHCI the3n in normal mode system works until "new device" (Samsung drive) is not loaded. Then crash.

I cannot install new drivers in safe mode and cannot reach normal mode to stop crashing.
I'm stuck, please help.

My System SpecsSystem Spec
08 Oct 2015   #2

Windows 10 Pro

Hi jomamoto,

Welcome to the 7forums.

Safe mode doesn't need all the devices the normal mode may use.
It is a possibility that there is corruption with the memory as the device driver stores data in the memory when it is loaded to access it later.

Please disable the device that is giving you trouble and see if you can boot normal without trouble.

Please test your memory for corruption.

BSOD x19 when installing Sata driver Diagnostic Test BSOD x19 when installing Sata driver

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
My System SpecsSystem Spec

 BSOD x19 when installing Sata driver

Thread Tools

Similar help and support threads
Thread Forum
BSOD when installing XP on Acer Aspire One Netbook (SATA Problem)
Hi SevenForums Members, I am having some trouble installing Windows XP onto an Acer Aspire One netbook. Complete Computer Specs (From Bios) CPU Type: Intel(R) Atom(TM) CPU N270 @ 1.60GHz HDD: Toshiba MK1652GSX System BIOS Version: V1.05 VGA BIOS Version: Intel V1585
Installation & Setup
SATA harddrive disappeared after installing intel RST driver?
I have two drives in my Win7 machine. 1 SSD, and the other is a old 80GB mechanical hard drive. To get the most out of my SSD I was advised to install intel RST driver, after this my old hard drive disappeared in Windows. But if I change SATA mode from ACHI to IDE in bios, I could get the old hard...
Hardware & Devices
BSOD after installing VGA driver
Hey guys, Here is my problem: when ever I install the VGA driver (any version of it- from the oldest to the newest) my laptop shows me a BSOD, each time with different messages (such as: page fault with non paged area, system service exception, memory management,...) Have you ever seen something...
BSOD Help and Support
Installing both sata 1 and sata 2 on my pc
Hello I was wondering If I have one sata 1 and an new sata 2(or 3) on my PC installed on my PC... will cause problems in transfer speeds? My Blue-ray is sata 1 also... Does this mean that all disks will work as sata 1?
Hardware & Devices
Installing Sata DVD Blu Ray Burner
This will be my first Sata DVD Drive how do I go about installing the drive (hardware). Thanks
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:12.
Twitter Facebook Google+