Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD only after normal log in (ntoskrnl.exe+735c0)

22 Oct 2015   #31
D3C3n50r

Windows 7 Home Premium 64-bit SP1
 
 

Any program I should use to remove or can I just uninstall from Device Manager?


My System SpecsSystem Spec
.
22 Oct 2015   #32
axe0

Windows 10 Pro
 
 

You could try DDU
Quote:
Please uninstall everything of AMD using Display Driver Uninstaller
My System SpecsSystem Spec
22 Oct 2015   #33
D3C3n50r

Windows 7 Home Premium 64-bit SP1
 
 

Ok just uninstalled GPU and rebooted in normal mode. DDU did say it would prevent Windows from auto updating after removal, should I do this manually?
My System SpecsSystem Spec
.

22 Oct 2015   #34
D3C3n50r

Windows 7 Home Premium 64-bit SP1
 
 

Just checked AMD site and they have a newer driver compared to the one I had but it's in beta.

version 15.10 beta: Mobile

my old one is:

version 8.933.0.0: Sony Support

Go with newer?
My System SpecsSystem Spec
23 Oct 2015   #35
axe0

Windows 10 Pro
 
 

As you have a laptop, ALWAYS and ONLY get your drivers from your manufacturer.
Your manufacturer is Sony, so only get it from Sony.
My System SpecsSystem Spec
23 Oct 2015   #36
D3C3n50r

Windows 7 Home Premium 64-bit SP1
 
 

Ok I installed the driver and it said everything installed properly. However I can not find it under Display Adpaters and it is not showing in dxdiag either.

Also here's latest dumps:
My System SpecsSystem Spec
23 Oct 2015   #37
axe0

Windows 10 Pro
 
 

Please check your manufacturer for BIOS updates, it is dating 2012.
My System SpecsSystem Spec
23 Oct 2015   #38
D3C3n50r

Windows 7 Home Premium 64-bit SP1
 
 

That is the latest one according to website:

Quote:
BIOS - R0240E6

6.33 Mb - 32 / 64 bit
-12-2012
Sony Support
My System SpecsSystem Spec
23 Oct 2015   #39
D3C3n50r

Windows 7 Home Premium 64-bit SP1
 
 

Just checked Sytem Info again and my current one says release date:

R0240E6 16/11/2012

You telling me this is an update?

R0240E6 XX/12/2012
My System SpecsSystem Spec
23 Oct 2015   #40
axe0

Windows 10 Pro
 
 

Just wanted to make sure the BIOS is up to date :)

The crashes are write errors, but no driver is flagged.
Please run driver verifier, this in most cases helps to mark the driver(s) causing problems.
Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa801f1a0370, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800039922e6, address which referenced memory



BSOD only after normal log in (ntoskrnl.exe+735c0) Diagnostic Test BSOD only after normal log in (ntoskrnl.exe+735c0)
 DRIVER VERIFIER

warning   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

Note   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
My System SpecsSystem Spec
Reply

 BSOD only after normal log in (ntoskrnl.exe+735c0)




Thread Tools




Similar help and support threads
Thread Forum
BSOD - Random - ntoskrnl.exe+735c0 - CRITICAL_OBJECT_TERMINATION
Intermittent BSOD - gives me a warning initially and then forces a reboot. I have attached MiniDump files. Any suggestions?
BSOD Help and Support
BSOD playing FIFA 16 [0x0000003b, ntoskrnl.exe+735c0]
Hello all Constant BSOD while playing FIFA and any other games... Already opened the PC cleaned contacts, cleaned inside tower, all drivers updated via Device Doctor and Driver Booster, and set up all voltages for hardwares manually because MoBo were doing it wrong, but now problem persists...
BSOD Help and Support
Once a day BSOD :( ntoskrnl.exe+735c0
Hi all, I've been getting BSODs since some days :zip: I've used BlueScreenViewer and the *itch seems to be ntoskrnl.exe+735c0 (see minidumps attached). Do you have any suggestions? W7 pro 16gb ram (I know I'll probably have to test that...). One primary SSD
BSOD Help and Support
Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)
Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded...
BSOD Help and Support
Random BSOD in normal use caused by ntoskrnl.exe
Hey! I've been experiencing random blue screens in the past few weeks. Sometimes i get them when playing, sometimes while browsing. I've downloaded Bluescreenviewer and according to it the problem lies in ntoskrnl.exe. I tested my ram and didn't get any errors overnight. Any ideas? Thanks in...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:38.
Twitter Facebook Google+