Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD 10~ Seconds After Startup | Multiple Possible Reasons

22 Oct 2015   #1

Windows 7 Home Premium 64bit
BSOD 10~ Seconds After Startup | Thanks koolkat77!

Sorry that I couldn't put my believed reasons why I believe my PC is bluescreening above, but WhoCrashed and BlueScreenView have said different things,

ntoskrnl.exe+f0017 FLTMGR.sys | klflt.sys klif.sys

The first two are from BSV, which if I am correct that should have to do with my hard drive and kernel systems and the other two, which I know have to do with Kaspersky, are from WhoCrashed, not that it entirely matters I just wanted to lay everything down so for less confusion later on.

Information on what I was doing before hand, dusting my PC and taking out my sound card, and yes I have unplugged and plugged back in my hardware such as my HDD, cables, etc.

First off, I have checked with sfc /scannow just to make sure it is not a integrity violation which after 4 tries I am supposedly clean. Next, I made sure it wasn't my ram since I was greeted by the BSOD with PAGE_FAULT_IN_NONPAGED_AREA even though so far every BSOD said the culprit was klif.sys. No luck. Then I've tried SeaTools (Because, ya' know FLTMGR.sys) fast and long, both said I was fine.

So what's next?

Bug Check Code from BSV - 0x00000050
I'll also provide WhoCrashed and BSV files along with the usual zip just to be safe and sound.

Good luck my friend!

My System SpecsSystem Spec
23 Oct 2015   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\KOOLKAT\Downloads\DAN-PC-Thu_10_22_2015_175504_79\102215-35677-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*c:\symbols*
Symbol search path is: SRV*c:\symbols*
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.19018.amd64fre.win7sp1_gdr.150928-1507
Machine Name:
Kernel base = 0xfffff800`0324d000 PsLoadedModuleList = 0xfffff800`03494730
Debug session time: Fri Oct 23 01:44:31.965 2015 (UTC + 6:00)
System Uptime: 0 days 0:01:59.775
Loading Kernel Symbols

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffffffffffff0, 0, fffff8800499eb2f, 0}

*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys

Could not read faulting driver name
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : klif.sys ( klif+d2b2f )

Followup: MachineOwner

4: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffffffffffffff0, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800499eb2f, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034fe100
GetUlongFromAddress: unable to read from fffff800034fe1c0

fffff880`0499eb2f 483913          cmp     qword ptr [rbx],rdx







ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

TRAP_FRAME:  fffff880047c5600 -- (.trap 0xfffff880047c5600)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800e9eaa90
rdx=00000000010ae200 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800499eb2f rsp=fffff880047c5790 rbp=00000000010ae200
 r8=fffffa800e9eaa70  r9=fffff880047c5840 r10=fffff8800494d420
r11=fffff880047c57b8 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
fffff880`0499eb2f 483913          cmp     qword ptr [rbx],rdx ds:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff8000333d017 to fffff800032c1200

fffff880`047c5498 fffff800`0333d017 : 00000000`00000050 ffffffff`fffffff0 00000000`00000000 fffff880`047c5600 : nt!KeBugCheckEx
fffff880`047c54a0 fffff800`032bf32e : 00000000`00000000 ffffffff`fffffff0 fffff880`047c5700 ffffffff`fffffff0 : nt! ?? ::FNODOBFM::`string'+0x4174f
fffff880`047c5600 fffff880`0499eb2f : fffff8a0`04173110 00000000`00000001 fffff8a0`04173110 00000000`00004200 : nt!KiPageFault+0x16e
fffff880`047c5790 fffff8a0`04173110 : 00000000`00000001 fffff8a0`04173110 00000000`00004200 00000000`00000000 : klif+0xd2b2f
fffff880`047c5798 00000000`00000001 : fffff8a0`04173110 00000000`00004200 00000000`00000000 fffff880`0499e5eb : 0xfffff8a0`04173110
fffff880`047c57a0 fffff8a0`04173110 : 00000000`00004200 00000000`00000000 fffff880`0499e5eb fffffa80`0e9eaa70 : 0x1
fffff880`047c57a8 00000000`00004200 : 00000000`00000000 fffff880`0499e5eb fffffa80`0e9eaa70 00000000`010ae200 : 0xfffff8a0`04173110
fffff880`047c57b0 00000000`00000000 : fffff880`0499e5eb fffffa80`0e9eaa70 00000000`010ae200 fffff880`047c57e0 : 0x4200


fffff880`0499eb2f 483913          cmp     qword ptr [rbx],rdx


SYMBOL_NAME:  klif+d2b2f

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  klif.sys


FAILURE_BUCKET_ID:  X64_0x50_klif+d2b2f

BUCKET_ID:  X64_0x50_klif+d2b2f


FAILURE_ID_HASH_STRING:  km:x64_0x50_klif+d2b2f

FAILURE_ID_HASH:  {02ce2f3e-294b-ab95-919a-576e9e005b60}

Followup: MachineOwner

4: kd> lmvm klif
start             end                 module name
fffff880`048cc000 fffff880`049b7000   klif     T (no symbols)           
    Loaded symbol image file: klif.sys
    Image path: \SystemRoot\system32\DRIVERS\klif.sys
    Image name: klif.sys
    Timestamp:        Thu Sep 24 18:51:03 2015 (5603F1B7)
    CheckSum:         000F1790
    ImageSize:        000EB000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Uninstall Kaspersky and see if that helps.

Revo Uninstaller:

Use Revo Uninstaller to uninstall stubborn software.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.

warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

 Clean boot
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:
My System SpecsSystem Spec
23 Oct 2015   #3

Windows 7 Home Premium 64bit

Ah yes, thank you, hopefully this wasn't too time consuming to pinpoint seeing as the only really, necessary step in this is uninstalling Kaspersky!

Also great minds think alike I see! (I did this overnight)

But don't worry, I'll use your recommended uninstaller right after a quick restart for Kaspersky! Thanks again!
My System SpecsSystem Spec

23 Oct 2015   #4

Windows 7 Home Premium 64bit

Hey I know you haven't replied back yet, but the Kaspersky dedicated uninstall got rid of the bsod, now I'm doing your steps to install MSE and the Revo Uninstaller! Very grateful! (Also sorry for multiple posts!)
My System SpecsSystem Spec
24 Oct 2015   #5

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

You're welcome.

Post if you have any further issues.
My System SpecsSystem Spec

 BSOD 10~ Seconds After Startup | Multiple Possible Reasons

Thread Tools

Similar help and support threads
Thread Forum
Multiple BSOD with different reasons
I got a new motherboard and an old processor installed 24 hours ago with win 7 32bit on it. It has been BSODing multiple times since then, more than 15 times in last 10 hours with different blue screen messages . I did a memory diagnostics test and it showed error for the first time and when i...
BSOD Help and Support
BSoD's while gaming multiple reasons
i haven't seen a consistant BSoD. i've ran memory checks, updated drivers cleaned as much registry errors as i possibly can without spending an arm and a leg on something i don't trust yet. i'm at wits and and google cannot help me anymore. i come you to all for help. i had this comp built by...
BSOD Help and Support
Multiple BSOD's with multiple reasons
hello, i built a new computer around 5 months ago, everything was running sweet until the last 4-6 weeks, when i started getting BSOD's (mostly when gaming or exiting gaming, but sometimes when browsing and running 2 or 3 programs at once) i had the memory management BSOD, pfn list corrupt BSOD,...
BSOD Help and Support
BSOD Multiple Reasons
Hello, I built a new computer about a month ago and about a week or two after it was built, I started getting BSODs. All checks on boot are passing and all my fans have been running. I have tried re-installing Windows twice already. Here's a list of the incidents since system reset. ...
BSOD Help and Support
BSOD MULTIPLE DIFFERENT REASONS(bad pool header etc etc)
Hello, I have received 6 BSOD in the last two days for varying reasons. Here is my system: OS -Windows 7 64 Bit Home Edition What was original installed OS on system? Windows 7 Pre-installed Age of system (hardware) About 10 months, purchased in late Nov 2010 Original OS I have never...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:52.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App