Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after Windows Update on Thinkpad T60

27 Oct 2015   #1
IceMan28

Windows 7 Ultimate x64
 
 
BSOD after Windows Update on Thinkpad T60

I have a Thinkpad T60 2007-4AU with Windows 7 Ultimate running on a flash drive, I used WinToUSB to install it, anyways all is well until Windows Update installed updates for a 3rd time.
Here is a screenshot of updates before I installed, this same thing happened before and I had to reinstall so I was prepared this time to catch the updates that were the culprit:



After those updates installed it rebooted and BAM! BSOD



It will not boot into Safe Mode at all, gives same BSOD, cannot do System Restore from Install disk, gives an unexpected error 0x80070057


My System SpecsSystem Spec
.
27 Oct 2015   #2
axe0

Windows 10 Pro
 
 

Hi IceMan28,

Welcome to the 7forums.

Do you have recovery media?
My System SpecsSystem Spec
27 Oct 2015   #3
IceMan28

Windows 7 Ultimate x64
 
 

I have a Windows 7 Install disc. tried system restore but it gives unexpected error 0x80070057 and I saved an Image of the system on my other laptop through the network.
My System SpecsSystem Spec
.

27 Oct 2015   #4
axe0

Windows 10 Pro
 
 

Please go to the advanced recovery options and open command prompt.
In command prompt, try following below.



BSOD after Windows Update on Thinkpad T60 Diagnostics Test BSOD after Windows Update on Thinkpad T60
 System File Check

Please try following:
  • Open an admin command prompt
  • Copy/paste "sfc/scannow" (without quotes) and press enter
  • When it finished reboot your system
  • Open again an admin command prompt
  • Enter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Note   Note
I am not very familiair with the troubleshooting options from Windows 7, it is possible that the command prompt is somewhere else then I have written
My System SpecsSystem Spec
27 Oct 2015   #5
IceMan28

Windows 7 Ultimate x64
 
 

Output is "There is a system repair pending which requires a reboot to complete. Restart Windows and run sfc again." I did that 3 times and got the same thing. I attached a log from where it mentions above. CBS.log
My System SpecsSystem Spec
27 Oct 2015   #6
axe0

Windows 10 Pro
 
 

Please run sfc, reboot, sfc a few more times.
There is a lot going on, although it is quite beyond my understanding my guess is that it is not yet finished.
My System SpecsSystem Spec
Reply

 BSOD after Windows Update on Thinkpad T60




Thread Tools




Similar help and support threads
Thread Forum
BSOD Thinkpad E560 Windows 7 when left in sleep mode
Hi, I recently got a new Thinkpad with Windows 7 and have been getting BSOD when I leave it in sleep mode for a while. I am attaching the log files here. Thanks in advance for any help.
BSOD Help and Support
Machine Check Exception after BIOS Update (Lenovo ThinkPad)
Hey folks, New user here. Just updated my laptop, a Lenovo ThinkPad Carbon, to 1.26/1.19 bioses, from the Lenovo website. After the BIOS updated, my PC rebooted and immediately BSODed with 0x0000009C (0x0000000000000006, 0xFFFFF880009EEB30, 0x00000000FE000000, 0x0000000000801136). I am unable...
BSOD Help and Support
BSOD Windows 7 Thinkpad T410s, when sleep starts
My Thinkpad T410s running Win7 64bit for the last few weeks has started doing a BSOD. I think it's occuring when the sleep state initiates. The blue screen is reporting a Driver Power State Failuare. attaching dump file zip
BSOD Help and Support
BSOD at random on Thinkpad T430
Need help with the BSOD on my thinkpad. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.4 Locale ID: 2057 Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA800D11AA10
BSOD Help and Support
Thinkpad fingerprint update messed with logon screen
I have a Lenovo Thinkpad T400 with Windows 7 professional 32-bit. Previously, my login screen would display a "fingerprint logon" option and my username concurrently. I just finished installing an update for the Lenovo fingerprint software using the Lenovo update utility, and now the logon screen...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:08.
Twitter Facebook Google+