New
#11
I can't help while asleep.
This is an open forum, keep in mind that we are in different time zones!
Last edited by axe0; 29 Nov 2015 at 14:50.
I can't help while asleep.
This is an open forum, keep in mind that we are in different time zones!
Last edited by axe0; 29 Nov 2015 at 14:50.
Daemon tools uses drivers that are known for causing bluescreen in Windows 7.
I recommend to remove Daemon tools to improve system stability.
Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
Diagnostic test
GPU TEST
Run Furmark to test your GPU. Furmark tutorial
NoteRun Furmark for around 30 minutes
WarningYour GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high
Code:BugCheck 1A, {41284, fffff8800a797001, f76, fffff78000001000} Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::DestroyOneAllocation+156 )
Make sure the gpu is properly seated and no dust is anywhere in the case.
If you're overclocking your gpu, revert back to stock!
Its stock. GPU is seated propertly. Gona play the game and wait for the BSOD appear. Maybe its repaired... Cuz ram is good,GPU is good, everything is up to date.. Well going to test it now on the game, be right back
If you're overclocking anything, revert back to stock while troubleshooting.
Unfortunately the dump isn't loading properly and I do not have the time for a standard procedure that might resolve the loading problem for the dump, it is the reason why my suggestion is based on usual causes for the crash 0x1E(KMODE_EXCEPTION_NOT_HANDLED) and a little debugging experience with this crash.Code:CPUID: "Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz" MaxSpeed: 4000 CurrentSpeed: 4008
Diagnostic Test
RAM TEST
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums
Note
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
All 4 ram stick passed 8/8 but when I tested ram one by one and find out that one ram stick was faulty. SO If you get this error and none help = RAM FAULT 100%