BSOD, apparently when installing Steam Games (pfn_list_corrupt, 4e)


  1. Posts : 3
    Windows 7 Professional 64 bit.
       #1

    BSOD, apparently when installing Steam Games (pfn_list_corrupt, 4e)


    This is a new build, CX430M Corsair PSU, already ran memorytest86, 10 passes and no problems, pass all tests on FurMark, Prime95 and Intel Burn Test, without overheating, no overclock, and has dual boot with Ubuntu 14.04 that runs smoothly for days straight, so I'm trying to rule out HW problems.

    The mem dumps are attached.
    Hope you guys can help me sort this out!
      My Computer


  2. Posts : 7,050
    Windows 10 Pro
       #2

    Hi eletronzip,

    Welcome to the 7forums.

    Assuming you ran MemTest86, I suggest to run MemTest86+
    Also let me know what the values of the RAM frequency and voltage are.



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

       Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling system and other used stuff.
    How to fill in your system specs:

      My Computer


  3. Posts : 3
    Windows 7 Professional 64 bit.
    Thread Starter
       #3

    Hi axe0, i'll only be able to perform another memtest, this time using memtest86+ on Wednesday, and I'll post the results.

    Is there any reason memtest86+ is better than memtest86, which has been updated frequently?

    And my system specs are updated.
      My Computer


  4. Posts : 7,050
    Windows 10 Pro
       #4

    Mainly depending on th DDR, if it is DDR3 memtest86+ is better
      My Computer


  5. Posts : 3
    Windows 7 Professional 64 bit.
    Thread Starter
       #5

    Hi axe0, I ran the memorytest86+ for 10 hours, got lots of errors... Then I tested each module alone and found the faulty one. It' s really strange that memorytest86 could not find any errors. Thank you for your advice, I'll use memorytest86+ from now on.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:38.
Find Us