Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD, Bug Check Code c5, ntoskrnl.exe

03 Dec 2015   #1

W7 Pro 64
BSOD, Bug Check Code c5, ntoskrnl.exe

Hello Seven Forum,

First Ive read the " Blue Screen of Death (BSOD) Posting Instructions" and the zip file is attached :)

Now to the nasty BSOD - Error:

The PC is running stable except on Program , I only get the c5 error when using one specific function from a Program called Unity(ver 4.6.9f1) this is a function for baking lightmaps, when called, this function will start Beast(a programm from Autodesk to bake lightmaps) and then while baking the BSOD appears. The Program it self seems to be stable too except that function.

What Ive done so far:

  • Checked CPU heat with HW Monitor - Not to Hot
  • Checked System pressure with PCMark 8 & HeavyLoad x64 - No Crash
  • Installed latest MS Updates
  • Installed lates Nvidia Driver
  • AV Scanner is MSE
  • No tools like CCleaner installed
  • Run MemX86 test for several Hours - No Errors

Sys Info:
W7 Pro 64-bit (6.1, Build 7601) Service Pack 1
i7 4771
NV GTX 760
8GB Ram
Gigabyte GA-Z87-D3H

So I hope the infos are what is needed to narrow the issue down,
Thanks in advance Dr. Falken

My System SpecsSystem Spec
03 Dec 2015   #2

Windows 10 Professional x64

Hiya and welcome to SevenForums!
BugCheck C5, {100000000, 2, 0, fffff80002ff59cc}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )
fffff880`08837588  fffff880`04cb524c nvlddmkm+0x22d24c
fffff880`08837590  00000000`00000001
fffff880`08837598  fffffa80`069e8000
fffff880`088375a0  fffffa80`09524a00
fffff880`088375a8  00000000`00000000
fffff880`088375b0  00000000`00070000
fffff880`088375b8  fffff880`04cb6037 nvlddmkm+0x22e037
Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again.! This is the guide for DDU: Display Driver Uninstaller: How to use

Open your startmenu and search for verifier.exe. Now click on the create custom settings(for code developers) option and click next. Now click on select individual settings from a full list and click enter. Now make sure you check the "Special Pool" option and the "Pool tracking" option. After that click next and next again. When you are at the last page click on the "Automatically select all drivers installed on this computer" option and click next. Now restart your computer and let Driver Verifier run for 24 hours.
My System SpecsSystem Spec
04 Dec 2015   #3

W7 Pro 64

Thanks Laith,

Ive done what you told me, unfortunately it crashed again with BCC D1
The DMP File is attached.
My System SpecsSystem Spec

04 Dec 2015   #4

Windows 10 Professional x64

Run Furmark, if the temps goes too high stop the test. Video Card - Stress Test with Furmark
My System SpecsSystem Spec
07 Dec 2015   #5

W7 Pro 64

FurMark was running three times for at least an entire hour every instance. It was not to hot(not beyond 80C) nor it produced visible artifacts.

Any idea what to do now?
My System SpecsSystem Spec

 BSOD, Bug Check Code c5, ntoskrnl.exe

Thread Tools

Similar help and support threads
Thread Forum
BSOD ntoskrnl.exe with different bug check strings every time
BSODs occur randomly, but most often when the computer is first started cold in the morning. It generally happens several times in a row and usually within 30 seconds of reaching the desktop; other times windows does not make it to the desktop at all. This HAS occurred in safe-mode with networking...
BSOD Help and Support
BSOD check code 126
Hi there I am experiencing repeated crashes to BSOD and cannot understand why. The cause is described as kernel power. I am pasting below the message when rebooting and the latest event viewer details. I am also attaching the minidump file. Grateful for your help Luca
BSOD Help and Support
BSOD playing Minecraft, driver ntoskrnl.exe, bug check code 0x00000124
This is my first time posting here, so my apologies if I mess something up or get it wrong. If I do, please let me know so I can fix it! This is something that's just started happening recently. It happened once on the 14th of February, then once last night (on the 22nd), and today on the...
BSOD Help and Support
BSOD Bug Check Code 50
I built a new computer a couple of months back using all new parts from an online store. Ever since day one I have experienced the occasional BSOD. I have tried updating the video card drivers, reseating the RAM etc but to no avail. I have used Memtest x86 and Windows 7 memory disgnostic and found...
BSOD Help and Support
BSOD bug check code 160 and 0
Ok im having some problems here at first i would get a random crash then restart when playing certain games. I was assuming it was a graphics card error or driver error. this is the error i received from this. BODY{font:x-small 'Verdana';margin-right:1.5em} .c{cursor:hand}...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:12.
Twitter Facebook Google+