Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Driver_power_state_failure BSOD. (Win 10 but ey)

15 Dec 2015   #1
sisrace

 
Driver_power_state_failure BSOD. (Win 10 but ey)

Hi, i have been batteling this BSOD i get everytime i wake my computer from sleep mode.
I went into secure mode and saw that "Generic PnP" in the device manager had a yellow exclamation-mark on it, so i uninstalled it completely (also tried just disabling it) and nothing, it did nothing..
I tried uninstalling a bunch of old drivers (updated my cpu, but the BSOD's happened before the upgrade)
I also updated all drivers that device manager found (built in updater)
But again, the problem still percists..

Now, i tried to access the .dmp files to se which driver/drivers was causing problems, after some research i found that doing this, logically simple reasearch turned out to be extremely hard! Without going on a rant about that i later saw that people recommended posting their .dmp files on seven forums
So here i am, asking you people to do work for me :S, i would greatly appreciate it if you could help me out
Attachment 377978
(Again, sorry for putting up win 10 problems on seven forums. however this is pretty universal?)
Thanks!


My System SpecsSystem Spec
.
16 Dec 2015   #2
Laith

Windows 10 Professional x64
 
 

Tjenare!

Code:
BugCheck 9F, {3, ffffe001d27fb060, ffffd001e23e6890, ffffe001da0b5120}
Unable to load image \SystemRoot\System32\drivers\dxgkrnl.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Unable to open image file: C:\Program Files\Windows Kits\8.1\Debuggers\x86\sym\USBXHCI.SYS\55D2D74F60000\USBXHCI.SYS
The system cannot find the file specified.

Unable to open image file: C:\Program Files\Windows Kits\8.1\Debuggers\x86\sym\ucx01000.sys\559F3A5738000\ucx01000.sys
The system cannot find the file specified.

Probably caused by : pci.sys
Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: Display Driver Uninstaller: How to use

Update your DirectX drivers.
My System SpecsSystem Spec
16 Dec 2015   #3
sisrace

 

Svensk också?
Anyways i went into safe mode with the DDU program and uninstalled everything, AMD (apperantly i had that), Intel and Nvidia, i then went into normal mode and installed the latest nvidia driver. I then put the computer to sleep mode and again, Driver_power_state_failure. Attachment 378051

I have not however updated my DirectX drivers, where do i find theese?

Also, DDU worked amazingly! Love it! But your post had a hotlink on the "driver" word which took me to a scetchy "norton?" Driver updater thing, dont know what that was about. sigh.. but oh well..

I will try to update DirectX and i will report back
My System SpecsSystem Spec
.

16 Dec 2015   #4
Laith

Windows 10 Professional x64
 
 

Jaa!

What hotfix are you talking about? Also, yes please do that.
My System SpecsSystem Spec
17 Dec 2015   #5
sisrace

 

Its seems like all "driver" words in a post/reply will get a "link" on it (ad) and it will send you to a driver manager software on a sketchy site.. The life without adblock is full of surprises.. (my chrome locks up randomly if i have it, and now without it my youtube .css thing wont load etc.. o_o) Anyways..

I tried to update directX, but Microsoft website gave me no luck and it told me that the windows updater will do it for me, i also got a new windows update btw. But i seem to have the latest directX drivers and my graphics drivers are freshly installed, but the problem seem to remain.. (sent the .dmp file btw)
My System SpecsSystem Spec
17 Dec 2015   #6
Laith

Windows 10 Professional x64
 
 

Run Furmark, if the temps goes too high stop the test. Video Card - Stress Test with Furmark
My System SpecsSystem Spec
17 Dec 2015   #7
sisrace

 

Quote   Quote: Originally Posted by Laith View Post
Run Furmark, if the temps goes too high stop the test. Video Card - Stress Test with Furmark
Oh, yeah this is far from a temperature problem!
My system is set to an extremely quiet setting, so during idle my gpu temps will lay around 45-50c, but under load it has never ever hit 70c, max i've seen is ~65c. Cpu temps idle is around 38c (again the inside of my case is pretty hot since my exaust chassi fan is turned off when its not needed), and under load (undervolted to -0.110V (stable)) hovers around 55-58c, but when i let the asus software overclock my cpu automatically it went up to 4.5Ghz at ~1.38V and max temps was 68-74c.
So temps is something im monitoring very carefully, since im very picky about noise, currently my system can not be heard, at all! And under 100% cpu load (H.264?) encoding it can start to give some "air movement" noises.
My System SpecsSystem Spec
17 Dec 2015   #8
Laith

Windows 10 Professional x64
 
 

Oh, okay. Have you overclocked?
My System SpecsSystem Spec
17 Dec 2015   #9
sisrace

 

I "accidentally" let the asus software overclock the system (quite impressive results from an aircooled cpu with "strict fan curves") Managed 4.5Ghz on ~1.28v but anyway. I found that the increased temperature and noise wasnt worth it so i went back to stock (<4.2Ghz) and all i did was change the voltage offset to -0.110V. But this problem happened before i changed anything with the cpu and even before i got the i7! (had an 8350)
My System SpecsSystem Spec
17 Dec 2015   #10
sisrace

 

Since my entire operating system is basically getting more and more faulty for every day im going to back up my stuff and just wipe everything, and reinstall windows... Didn't want to do it but can't find any solutions to the tons of problems that have popped up recently so this will be easier... Who knows, i might get rid of the BSOD's too, or not, i dont know. This reply is probably not something that other people who are looking to solve this problem want to see, but i dont have the patience nor time to solve the mess that is my operative system. I will report back
My System SpecsSystem Spec
Reply

 Driver_power_state_failure BSOD. (Win 10 but ey)




Thread Tools




Similar help and support threads
Thread Forum
BSOD - Driver_Power_State_Failure
For the past couple of weeks whenever I try to shutdown windows it hangs on the shutdown screen for a while, blue screens and then restarts. If I try to shutdown the computer from the login screen once it restarts, it will shutdown. I've tried troubleshooting but have been unsuccessful. Can someone...
BSOD Help and Support
Bsod driver_power_state_failure
Hello. I have been experiencing rather frequent BSOD over the last few days. The first few happened as I was transferring data from one HDD to the other. The latest one happened while clicking a link. That's when I got the Driver power state failure error message. Thanks for any help in advance. ...
BSOD Help and Support
BSOD driver_power_state_failure
Hi all, I have been having driver_power_state_failure errors for the last several months. About 1 a week for the last 3 weeks. Not all appear to be related to sleep/hibernation issues. Hopefully I have attached all the relevant information. Any help is greatly appreciated. Ron
BSOD Help and Support
Bsod, driver_power_state_failure
I started experiencing BSOD Back in Sep with message: DRIVER_POWER_STATE_FAILURE. Eventually it crashed and would not boot to windows (only blue screen). I recovered the system back to an earlier full-system image (that was fun :sarc:). Problem fixed, but returned again in Oct (7 BSOD since). ...
BSOD Help and Support
BSOD Driver_power_state_failure
Hey Earlier today i had a BSOD while my laptop was shutting down. It's 4-5 months old and came with Windows 7 64 bit pre-installed, however its only a few days ago since i ran OS recovery and reinstalled windows. I recently tried virtualization with VMware player and i got a feeling that it is...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:57.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App