Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD with wdf0100.sys

29 Dec 2015   #1

WIn 7 64 bit
BSOD with wdf0100.sys

Walked in today with a BSOD. Has a page fault in wdf0100.sys. I have restarted a couple of times, either in safe mode or safe mode with networking, and sometimes it would restart by itself, sometimes it would give the same BSOD. A quick hardware check and nothing seems amiss. This computer is my shipping computer, so not much else on it but Worldship. I attached the dump file, please let me know what I can do

My System SpecsSystem Spec
30 Dec 2015   #2

Windows 7 Home Premium

Hi trimark and welcome to sevenforums, I hope you'll enjoy your stay here!

I noticed that you haven't uploaded a zip, could you please follow Blue Screen of Death (BSOD) Posting Instructions and upload a zip report here.

Could you please upload it because without it it will be next to impossible to help with your issue!

Boris :)
My System SpecsSystem Spec
30 Dec 2015   #3

WIn 7 64 bit

Sorry guys, I really thought i did that. Here it is.
My System SpecsSystem Spec

30 Dec 2015   #4

Windows 7 Home Premium

Asch, no need to apologize.

Thanks for posting I'm researching your problems!
My System SpecsSystem Spec
30 Dec 2015   #5

Windows 10 Pro

Please follow suggestions below carefully.

BSOD with wdf0100.sys Diagnostics Test BSOD with wdf0100.sys
 System File Check

Please try following:
  • Open an admin command prompt
  • Copy/paste "sfc/scannow" (without quotes) and press enter
  • When it finished reboot your system
  • Open again an admin command prompt
  • Enter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

BSOD with wdf0100.sys Diagnostic Test BSOD with wdf0100.sys

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

BSOD with wdf0100.sys Diagnostics Test BSOD with wdf0100.sys

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums

Note   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune to
  • scan for errors, no quick scan but full scan
  • check the health,
  • benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
  • of the error scan,
  • make a screenshot of the health of every hard drive and post the screenshots,
  • post screenshots with the benchmark of the
    • transfer rate,
    • access time,
    • burst rate,
    • cpu usage.

Please fill in your system specs
Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
How to fill in your system specs:

Please check your motherboard manufacturer for driver updates for the Nvidia Sata controller driver.
Driver Reference Table - nvstor.sys
fffff880`0326d740  fffff880`00e1343c*** WARNING: Unable to verify timestamp for nvstor.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor.sys
kd> lmvm nvstor
start             end                 module name
fffff880`00e00000 fffff880`00e2b000   nvstor   T (no symbols)           
    Loaded symbol image file: nvstor.sys
    Image path: \SystemRoot\system32\drivers\nvstor.sys
    Image name: nvstor.sys
    Timestamp:        Fri Mar 19 21:45:11 2010 (4BA3E257)
    CheckSum:         0002FE37
    ImageSize:        0002B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
31 Dec 2015   #6

WIn 7 64 bit

So using the Memtest86, the memory tested ok for 8 times, then the next time I tried it after an hour of the computer being unplugged and ran it 8 more times, and it didn't pass, so i replaced it. So far so good.

Thanks for help everyone.
My System SpecsSystem Spec

 BSOD with wdf0100.sys

Thread Tools

Similar help and support threads
Thread Forum
Random BSOD wdf0100
Last couple of months i've been getting a bunch of performance issues/blue screen/fps drops/loss of internet when it shouldn't happen. A bunch of times i'm getting DRIVER_IRQL_NOT_LESS_OR_EQUAL remarks aswell. i'll upload the logs here and i really hope someone would be able to help me here .. What...
BSOD Help and Support
BSOD - wdf0100.sys error
I've deployed a new Win 7 x64 OS and installed all updates. Now I am receiving BSOD with references to wdf01000.sys and DRIVER_IRQL_NOT_LESS_OR_EQUAL remarks. Attached is a zip file with two memdumps. Any suggestions on resolving this would be appreciated.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:01.
Twitter Facebook Google+