New
#1
BSOD 0x0000003b file ntoskrnl.exe+73969
Please help, how to fix this error ntoskrnl.exe+73969r?
Please help, how to fix this error ntoskrnl.exe+73969r?
Is there any specific reason behind enabling driver verifier? There is only one crash dump in the uploaded zip, so we cannot justify it. And Driver Verifier is supposed to cause BSODs by definition.
Disable Driver Verifier.
If it causes any further BSOD in the normal mode, report us back.
__________________________________________________________
Code:BugCheck 3B, {c000001d, fffff80002f95bed, fffff8800351b9f0, 0} Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+10d ) Followup: MachineOwner ---------Code:Verify Flags Level 0x0000092b
This are all my minidump files.
Get new BSOD
Crash dump reports a hardware issue.
And verifier verifies drivers, not the hardware. You should not have enabled it at all at the first place.Code:BugCheck A, {fffff880277821bd, 2, 1, fffff80002abf8f1} Probably caused by : hardware ( nt!ExpReleaseResourceForThreadLite+221 ) Followup: MachineOwner ---------
To go hardware troubleshooting for such an old computer, first of all we need to know the system heat. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .
________________________________________________________
Code:BiosVersion = 2105 BiosReleaseDate = 05/26/2009 SystemManufacturer = System manufacturer SystemProductName = P5Q3 DELUXE SystemFamily = To Be Filled By O.E.M. SystemVersion = System Version SystemSKU = To Be Filled By O.E.M.
Speccy snapshot http://speccy.piriform.com/results/h...RbzkK8ULW52e61
OK. It looks fine. Now let us have some hardware tests.
Stress test the Graphics Card using Furmark.Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.
Stress test the CPU. It saves the result as a .txt file in the prime95's folder. Upload the file for us.
Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
Also let us know the wattage of the installed PSU.
Let us know the results.
eXtreme Power Supply Calculator results:
Load Wattage: 377 W
Recommended UPS rating: 750 VA
Recommended PSU Wattage: 427 W
My PSU: Codegen 400x, ~400W
How long need run Hardware - Stress Test With Prime95?
As said there: at least two hours or errors come.So your PSU is less that what needed. 400W is insufficient, and which is alone enough for all the issues, but may not be the only one. You need to get a PSU with higher wattage, and then continue with the other tests.6. Leave the test running for up to 2 hours, unless errors occur sooner. Errors will show up by one or more of the workers stopping.