While using Pinnacle Studio 15, if I ask the program to do anything vaguely intensive it crashes the computer. I have run the dumpfile tool and have attached the ZIP file.
I gave the PC a good clean out (there was a fair bit of dust) and I noticed that the SLI bridge was a bit loose so I secured that. Since I haven't has any BSOD problems but I thought I'd ask you folk to make sure.
Please remove items from the startup
How to remove items from startup - Windows 7 Help Forums
These programs could interfere with the boot process giving you trouble and increase the boot time.
There are some crashes, of which no dumps have been created, that are memory (related) crashes, please test your memory to ensure it is fine :)
Diagnostic Test
RAM TEST
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums
Note
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Many thanks for your help, I will get Memtest running tonight! :)
Quote