New
#1
BSOD happening randomly, error ***STOP: 0x0000007A
Hi, guys! I'm new here, so have some patience.
A couple of months ago I had a problem with my notebook, apparently the hard drive broke somehow, and I had to buy a new one (Samsung HN-M101MBB 2AR10001), but since then it's getting random BSOD after an undefined number of hours for no reason, even if I'm not doing anything. I sent it to repair a lot of times and the problem was never fixed. I searched everywhere in the internet for answers and got nothing, so I'm kinda desperate now.
Here's the message from the BSOD:
KERNEL_DATA_INPAGE_ERROR
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
***STOP: 0x0000007A (0x00000020, 0x000009D, 0x8A8E6BDC, 0x00000000)
Collecting data for crush dump ...
Initializing disk for crush dump ...
The numbers after 0x0000007A change almost everytime a BSOD happens. No mini-dump is ever created, even after changing the settings to do so. Also, after it restarts, it gets stuck in BIOS, and the hard drive doesn't show up, but it'll show up if I completely turn off the notebook. I already run Memtest86 and SeaTools without any errors, but I'll run them again if you guys ask me to do so.
My guess is that somehow the computer stops recognizing the hard drive and I need to update the BIOS or something, but I don't wanna tough anything without getting some advice. I attached the file created from DM Log Collector so you can check them.
Thanks in advance