Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD when i plug USB Devices

13 May 2016   #1

Windows 7 Ultimate x32
BSOD when i plug USB Devices

Recently, i have BSOD everytime i plug USB Devices like External HDD or USB Flashdisk, it's not happen when i plug USB Mouse

this the zip

Thanks Arc

My System SpecsSystem Spec
14 May 2016   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

The disk mounting subsystem is failing.
BugCheck 1000007E, {c0000005, 83858543, 8b719578, 8b719150}

*** WARNING: Unable to verify timestamp for fltmgr.sys
*** ERROR: Module load completed but symbols could not be loaded for fltmgr.sys
*** WARNING: Unable to verify timestamp for mountmgr.sys
*** ERROR: Module load completed but symbols could not be loaded for mountmgr.sys
Probably caused by : mountmgr.sys ( mountmgr+5e4b )

Followup:     MachineOwner
Most probably because of this ...
8b719cd0  89040000*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first (we cannot chech it for you as you havent supplied all the necessary files). Then download SPTD standalone installer from, and execute the downloaded file as guided below :
  • Double click to open it.
  • Click this button only:
  • If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
My System SpecsSystem Spec

 BSOD when i plug USB Devices

Thread Tools

Similar help and support threads
Thread Forum
Plug in GTX 260, hooked up one 6 pin power plug, motherboard wont post
I verified the PSU is good. I removed all drives, all cards, even memory. All the fans spin for a moment then nothing they stop. I assume the MB is now destroyed? A GTX 260 has two 6 pin power connectors, since the PSU only had one 6 pin power connector, I thought to try it. MB is Asus P5QC...
Hardware & Devices
plug and play bluetooth dongle not detecting devices and not able to f
i just bought a plug and play blutooth dongle . the first time i put it in it installed certain drivers but 2 failed and it said device unplugged. so i uninstalled the drivers and plugged in the dongle again. now it installed evrythin fine. but when i try to add a device it dosent discover...
Hardware & Devices
Plug and Play is enabled, but devices do not recognize that it is on.
Okay so basically some programs and devices started acting a bit goofy about a month ago, it was small stuff and I didn't really care. Now my Wacom Bamboo Create Tablet stops working, as well as my printer/scanner (Canon MP490). This was too much so I tried finding the problem, so I head to my...
Hardware & Devices
Win7 computer in IDE mode and cannot access USB plug and play devices
I recently noticed that I could not access any of my plub and play USB devices on my Windows 7 computer. I just also noticed that when I reboot, I know get a DOS message momentarily that says I am in IDE mode and my plug and play devices cannot be supported. It also provides me with the option...
Hardware & Devices
Plug and Play disable my USB devices
this problem is getting annoying.. i have to keep system restoring to a point where my keyboard and mouse which are both USB work in the beginning when windows 7 loads up... that is until Plug and Play tries to install the devices. after window is done installing and say it have been...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:41.
Twitter Facebook Google+