BSOD without the BSOD cause I lose input to monitors

Okay running the 2gb sticks now, will give updates.

Thanks :)

update :2gb sticks - 9 passes all good

Running the 4gb sticks now

2nd update: 4gb sticks - 8 passes all good

RAM appears to be fine :)

You probably did not make a photo of it as requested?

Editing a post does NOT notify someone, you want to post a new reply instead.

Certain details like the frequency of the memory for example, you can check that in the BIOS but I would like to see it returning in the memory test, there are however more things that cannot be found elsewhere (easily)

I'll post the test again, requested is to run MemTest86+ for 8 passes.
Make a photo before you close it, the photos you made were not appropriate because we need photos after the test finishes.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

You did not run the MemTest that axe0 requested. You must follow instructions.
The first step in the tutorial.

1. Download the latest version of the "Auto-installer for USB Key (Win 9x/2k/xp/7)" from this link: Memtest86+ - Advanced Memory Diagnostic Tool

You used MemTest v4.3.7


Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums


** Memtest86+ V5.01 (27/09/2013)**

Memtest86+ - Advanced Memory Diagnostic Tool

I will go back to watching this thread.