New
#21
OK, just let us know. Sorry about the power problem. You had a good plan.
OK, please install, if you don't already have it, CPUz (CPU-Z | Softwares | CPUID) Please post screenshots of the CPU, mainboard, Memory and SPD tabs. On the SPD tabs you can select each Dimm Slot. We only need the Dimm Slots that are populated with ram. Please upload the files here. This will tell you how.
Screenshots and Files - Upload and Post in Seven Forums
Also What utilities do you have to monitor temps? I would like you to monitor CPU and GPU temps, pretty constantly.
I need you to put a USB drive in and go into bios and take screenshots of all of the Tweeker section. I need to see it.
You are also running a bios that is for the newer 69XX CPUs. I don't know if that hurts or not. I didn't update mine because of that. I don't know what it does for sure. The description of the updates say it is for the latest CPUs.
Your BIOS is a lot different than mine. I have the same board, but your board is running bios version 2.17 and mine is running 2.16, plus I am running bios version 2101, I didn't change because the last 2 bios updates were for the newer CPUs, which I don't have.
I have some categories you don't have, such as CPU Strap. I don't know if you just have a newer model board than I do or if it is the bios updates. But, everything seems to be set to auto except the ram.