BSOD (playing Runescape) and Win 10 problems

Please read BSOD Posting Instructions & How to upload files


Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
How to fill in your system specs:

Please uninstall ASRock software while troubleshooting.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.



Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to install as less as possible software using custom/advanced options, you can use this tutorial to do so AMD Graphics Drivers - Install Without Catalyst Install Manager
Attachment 389854

Code:

2: kd> lmvm atikmdag
Browse full module list
start             end                 module name
fffff880`0f438000 fffff880`10dd7000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Browse all global symbols  functions  data
    Timestamp:        Mon Mar 21 15:19:43 2016 (56F002FF)
    CheckSum:         019223DD
    ImageSize:        0199F000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

This did not fix the problem.
Edit: Perhaps the fact that I have tried to ugprade to Windows 10 before aswell and it has ended up in errors which meant the computer restored Windows 7 again has caused problems.

That the Windows 10 upgrade failed means we need to first get your system stable before you attempt it again, or if it is a drivers fault you could perform a clean install of Windows 10 immediately with your key.

I know it's not 8 passes, but it took a long time and I really don't think RAM is at fault here.

It does not matter if you don't think the memory is at fault, the memory needs to be tested properly so we can rule it out.
8 passes on 8GB takes usually about 8-10h, but could take some more time.

Stuff as programs are better to be not backed up, because then you need to backup the system as when backing up programs you need to add the registry and then you need to take the Windows installation too because else it could go wrong.

Everything else can be backed up manually on a USB drive or external HDD.