BSOD after startup and loading my programs (Did a system restore)

Page 2 of 5 FirstFirst 1234 ... LastLast

  1. Posts : 30
    Windows 7 64-bit
    Thread Starter
       #11

    Two new screenshots after the F6 defaults.
    Also attached a new zip
    https://1drv.ms/i/s!AmB3xSQ51UQ6hF892XVoxqinnz2p

    https://1drv.ms/i/s!AmB3xSQ51UQ6hGDrwtJ55WEpxp_d
      My Computer


  2. Posts : 7,050
    Windows 10 Pro
       #12

    Which should I believe? Both are from the same time where 1 is way too high.
      My Computer


  3. Posts : 30
    Windows 7 64-bit
    Thread Starter
       #13

    Both are same screen shot, but the menu is scrolled down? (Showed you the whole list of Overclocking section)
    Since I changed some setting with the F6 reset that my info might be different and linking a NEW zip would help pin-point possible problems.

    Edit: I thought pressing f6 would reset everything to default. It also indicated that it did and I saved settings and restarted my system?

    Should I just manually adjust my DRAM Frequency to 1600Mhz?
    Last edited by AnnaB; 25 Jul 2016 at 05:44.
      My Computer


  4. Posts : 7,050
    Windows 10 Pro
       #14

    I didn't look properly, the one that is 'too high' is the CPU

    Since I changed some setting with the F6 reset that my info might be different and linking a NEW zip would help pin-point possible problems.
    The information you're referring to is only in the dumps and since you haven't had another crash there isn't a difference.
      My Computer


  5. Posts : 30
    Windows 7 64-bit
    Thread Starter
       #15

    Would it show my Memory at 2133Mhz still?
      My Computer


  6. Posts : 30
    Windows 7 64-bit
    Thread Starter
       #16

    AnnaB said:
    Should I just manually adjust my DRAM Frequency to 1600Mhz?
    This question also!
      My Computer


  7. Posts : 7,050
    Windows 10 Pro
       #17

    I mentioned that there isn't a difference with the dumps, the dumps contain data from crashes you already had, I showed what it says.
      My Computer


  8. Posts : 30
    Windows 7 64-bit
    Thread Starter
       #18

    axe0 said:
    I mentioned that there isn't a difference with the dumps, the dumps contain data from crashes you already had, I showed what it says.

    Now I understand what you're saying. Sorry, its late here.
      My Computer


  9. Posts : 7,050
    Windows 10 Pro
       #19

    AnnaB said:
    Should I just manually adjust my DRAM Frequency to 1600Mhz?
    You could try it yes, looking at the specs of your CPU, RAM & motherboard it would be best to have the DRAM frequency at 1600MHz.
      My Computer


  10. Posts : 30
    Windows 7 64-bit
    Thread Starter
       #20

    axe0 said:
    AnnaB said:
    Should I just manually adjust my DRAM Frequency to 1600Mhz?
    You could try it yes, looking at the specs of your CPU, RAM & motherboard it would be best to have the DRAM frequency at 1600MHz.
    Thank you! I will do this and post when a BSOD happens. *Fingers crossed it doesn't happen!!*
      My Computer


 
Page 2 of 5 FirstFirst 1234 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:16.
Find Us