New
#1
Problem caused by ntoskrnl.exe & hal.dll
Hi
I am using HP DV6-7000 laptop. From last 2 years i have been using my PC in Safemode with Networking because if i run my pc in normal mode BSOD appears within a min or two.
I have troubleshooted hundreds of PCs of other people but could not troubleshoot my own pc this time for 2 years. I have tried almost everything but could not figure it any way yet.
Just to let you know, I have tried the following already.
-Replaced RAM
-Replaced Hard Disk
-Run alomost all Hard Disk & Memory Test (Memtest86+) discussed on the forum and all were passed.
-Installed fresh copy of windows more than 100 Times
-Updated Drivers (using Device Manager)
-I am not Overlocking my processor
-Already put/replaced thermal paste of the processor
Since the PC has been working perfectly in Safemode for two years, so i feel no need to replace processor. Although processor gets heated in Normal mode sometimes when BSOD appears. To me it looks like there is some issue with any Service or Driver which is causing effect on processor. There are so many services/drivers and I dont know any efficient way to daignose the problematic service/driver. But thats all my personal opinion may be the problem is in some component.
I have attached the requested LOG files but just to give you a summary of WhoCrashed Report, following two BSOD most commonly appears
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x101 (0x31, 0x0, 0xFFFFF88003DE2180, 0x3)
Error: CLOCK_WATCHDOG_TIMEOUT
This was probably caused by the following module: hal.dll (hal+0x12A3B)
Bugcheck code: 0x124 (0x0, 0xFFFFFA800735E028, 0xBE000000, 0x800400)
Error: WHEA_UNCORRECTABLE_ERROR
Despreately waiting for the solution. Thank you.
Akif